50
1
A
2
3
4
5
7
6
Adjusting the clutch lever 4-gear model
CAUTION
If you drive with no clutch lever play, the
clutch will be damaged.
Check:
-
Pull the lever until there is discernable
resistance.
-
Measure the play. Required value:
A = min. 3-4 mm
Adjustment:
-
Push back protective cap (1).
-
Release the lock nut (2).
-
Turn setting screw (3) as appropriate.
-
Tighten up the lock nut (2).
-
Check the play.
NOTE
If the clutch play cannot be corrected with
this adjustment, the following adjustment
must be made.
-
Release the lock nut (2).
-
Tighten setting screw (3) all the way, so
that the clutch cable can be made as slack
as possible.
-
Tighten up the lock nut (2).
-
Remove screws (4) and take off the clutch
cover (5).
-
Release the lock nut (6).
-
Adjust the setting screw (7) until the
desired clutch lever play (A = 3-4 mm) is
reached.
-
Tighten up the lock nut (6).
-
Reassemble the clutch cover (5) with
gasket.
CAUTION
Have adjustment checked by a SFM
dealer.
NOTES ON MAINTENANCE
