Page # 33
877 1st Ave. N.W. | Sioux Center, IA 51250 | Toll Free: 1.866.722.1488 | siouxautomation.com
OPERATION
REPLACEMENT PARTS
READ complete manual CAREFULLY
BEFORE attempting operation.
877 1st Ave. N.W. | Sioux Center, IA 51250 | Toll Free: 1.866.722.1488 | siouxautomation.com
OPERATION
REPLACEMENT PARTS
READ complete manual CAREFULLY
BEFORE attempting operation.
Sioux Automation 3500 series mixers are equipped with a hydraulically powered chain slat conveyor for unloading and
distributing the mixed rations to the feeding area. While there are several unloading conveyor options available, service for
each assembly is essentially the same.
Conveyor Chain Tension
To adjust the conveyor chain tension, follow this procedure:
1.
Clear the area of bystanders, especially small children.
2.
Place all controls in neutral, stop the engine, set park brake, relieve hydraulic pressure, remove ignition
key, and wait for all moving parts to stop before servicing, adjusting, repairing, or unplugging.
3.
Chain Tension:
a.
The chain is set at the proper tension
when it runs without jumping the drive
sprockets.
b.
Pull up at the center of a span.
c.
The chain should come up approximately
1-1/2 inches (38 mm) when the chain
tension is properly set.
4. Setting:
a.
Loosen jam nuts on adjusting bolt.
b.
Loosen bearing housing anchor bolts.
c.
Slide or tap housing to the required position. Use adjusting bolt to move housing if required.
d.
Repeat with other housing.
Important:
Always move both ends of the shaft the same amount to keep the shaft at right angles to the chain.
e.
Tighten bearing housings anchor bolts to their specified torque.
f.
Tighten adjusting bolt jam nuts to their specified torque.
Chain Coupler Drive Assembly
All unloading conveyors are equipped
with a chain coupler drive assembly,
which connects the output shaft of
the hydraulic motor to the driveshaft
assembly on the conveyor. Periodical-
ly inspect the condition of the chain
coupler and components. Apply a light
coating of grease to the chain cou-
pler assembly to keep rust and other
contaminants from deteriorating these
components.
CONVEYOR MAINTENANCE
Summary of Contents for MAXI-MIXER 3500 TRAILER Series
Page 104: ......