Sabre Sabre 30, Owner'S Manual

Page: 16 / 81

3/21/2017 Sabre 30 Owners Manual
16/81
3:10 ___ Review all running rigging for completeness.
3:11 ___ Install mainsail reef eyes and blocks on boom to suit reefing eyes in sail.
4:00 BEFORE STARTING ENGINE
4:01 ___ Review Engine Manual
4:02 ___ Align engine to shaft with rig stepped and tensioned. Engine is disconnected
prior to shipment. Coupling bolts are labeled and shipped in galley drawer. (step locker
in Sabre 38)
4:03 ___ Check engine coolant drain plugs.
4:04 ___ Check action of throttle, shift and engine stop controls.
4:05 ___ Fill fuel tank to at least one half full.
4:06 ___ Check fuel tank, fuel lines and fuel filter for leaks.
4:07 ___ Check engine and transmission oil levels.
4:08 ___ Check that engine water intake seacock is open.
4:09 ___ Check levels of water in fresh water engine cooling reservoir.
4:10 ___ Run engine compartment blower for 4 minutes, check air suction and discharge of
vent ducts.
4:11 ___ Check battery water levels.
4:12 ___ Check that batteries are properly secured.
4:13 ___ Check battery switch, battery charge indicator (option).
4:14 ___ Check main breaker and breaker panel light.
4:15 ___ Check navigation lights, sidelights, masthead and stern lights. Check that
added equipment does not obscure the lens light arc. Review current regulations with
owner.
4:16 ___ Check anchor light, foredeck flood light.
4:17 ___ Check engine instrument lights, compass light.
4:18 ___ Check all cabin lights.
4:19 ___ Check shower sump pump (option).
4:20 ___ Check electric bilge pump (option).
4:21 ___ Check 110V AC shore power (option).
4:22 ___ Check 110V AC voltmeter/polarity indicator and instruct owner on its use.
4:23 ___ Check 110V AC receptacles.
4:24 ___ Check Lectra/San operation (option).
4:25 ___ Check operation of navigational instruments (option).
5:00 STARTING ENGINE
5:01 ___ Review Engine Operation manual with boat owner.
5:02 ___ Open fuel valve.