![background image](http://html1.mh-extra.com/html/sabo/92-13-h-b/92-13-h-b_instruction-manual_3225104074.webp)
eng 34
TROUBLESHOOTING
7.
TROUBLESHOOTING
PROBLEM
SITUATION
LIKELY CAUSE
SOLUTIONS
1.
Pilot lamp off
2.
Starter motor
not working
3.
Engine does
not start
4.
Starting is diffi-
cult or the engine
runs erratically
5.
Weak engine
performance dur-
ing cutting
Key is in «ON»
position,
engine
stopped
Key in
«START» posi-
tion and pilot
lamp on
Key in
«START» posi-
tion and pilot
lamp flashing
Key in
«START» posi-
tion
Key in «ON»,
engine running
Key in «ON»,
engine running
Electronic card in safety alert, due
to:
– badly connected battery
– completely flat battery or eroded
battery plates
– battery terminals crossed
– fuse blown
– baathed
– electronic card wet
– earthed micro-switches
– insufficiently charged battery
– battery charger fuse blown
– badly earthed
– you are not ready for starting
– faulty fuel supply
– faulty ignition
– fuel fault
– forward speed too high in relation
to cutting height
Put the key in the «OFF»
position and look for the
cause of the problem:
– check connections
– recharge battery
– connect properly
– replace fuse (6.3 A -
delayed)
– check connections
– dry by air
– check connections
– recharge battery (if the
problem continues, consult
your Dealer)
– replace fuse (25 A)
– check connections
– check that the conditions
allowing starting are met
(see page 24.a)
– check fuel level
– open fuel stop-cock
– check fuel filter
– check that spark plugs caps
are firmly fitted
– check that the electrodes
are clean and have the cor-
rect gap
– clean or replace the air filter
– flush out the float chamber
– empty fuel tank and refill
with new fuel
– check and, if necessary,
replace fuel filter
– reduce the forward speed
and/or raise the cutting
deck