background image

#%

MADE IN USA
Manufactured by: Sabine, Inc.
13301 Highway 441
Alachua, Florida 32615-8544  USA
Phone: (904) 418-2000 • Fax: (904) 418-2001
www.SabineUSA.com

GRQ-OpGd-v7.p65

000222 - hto

Limited Warranty

CAUTION

CAUTION

This apparatus contains a lithium battery.  Replacement shall be made
by qualified service personnel only.  Call Sabine at 904-418-2000 or
consult an authorized Sabine agent.

FBX and FBX Feedback Exterminator are registered trademarks of
Sabine, Inc., and are the brand names of its line of automatic
feedback controllers.  Covered by U.S. Patent No. 5,245,665,
Australian Patent No. 653,736, Canadian Patent No. 2,066,624-2,
German Patent No. 69118486.0, and U.K. Patent No. 0486679.  Other
patents pending.

REAL-Q and REAL-Q2 are protected by U.S. Patent No. 5,506,910.
Other patents pending.

GRAPHI-Q, POWER-Q, REAL-Q, and REAL-Q2 are trademarks of
Sabine, Inc.
Copyright 1999.  All rights reserved.

THIS LIMITED WARRANTY VALID ONLY WHEN PURCHASED AND REGISTERED IN THE
UNITED STATES OR CANADA. ALL EXPORTED PRODUCTS ARE SUBJECT TO
WARRANTY AND SERVICES TO BE SPECIFIED  AND  PROVIDED BY THE AUTHORIZED
DISTRIBUTOR FOR EACH COUNTRY.
Ces clauses de garantie ne sont vaiables qu’aux Etats-Unis et au Canada. Dans tous les autres
pays, les clauses de garantie et de maintenance sont fixees par le distributeur national et
assuree par lui selon la legislation en vigueur.
Diese Garantie ist nur in den USA and Kanada gultig. Alle Export-Produkte sind der Garantie
und dem Service des Importeurs des jewelligen Landes untervorfen.
Esta garantia es valida solamente cuando el producto es comprado en E.U. continentales o en
Canada. Todos los productos que sean comprados en el extranjero, estan sujetos a las
garantias y servicio que cada distribuidor autorizado determine y otrezca en los diferentes
paises.

ONE-YEAR LIMITED WARRANTY/REMEDY
SABINE, INC. (“SABINE”) warrants this product to be free from defects in material and
workmanship for a period of one (1) year from date of purchase PROVIDED, however, that this
limited warranty is extended only to the original retail  purchaser and is subject to the
conditions, exclusions and limitations hereinafter set forth:
CONDITIONS, EXCLUSIONS AND LIMITATIONS OF LIMITED WARRANTIES
These limited warranties shall be void and of no effect if:
a. The first purchase of the product is for the purpose of resale; or
b. The original retail purchase is not made from an AUTHORIZED SABINE DEALER; or
c. The product has been damaged by accident or unreasonable use, neglect, improper service
or maintenance, or other causes not arising out of defects in material or workmanship; or
d. The serial number affixed to the product is altered, defaced or removed; or
e. The power supply grounding pin is removed or otherwise defeated. In the event of a defect
in material and/or workmanship covered by this limited warranty, Sabine will repair the defect in
material or workmanship or replace the product, at Sabine’s option; and provided, however,
that, in any case, all costs of shipping, if necessary, are paid by you, the purchaser.
     THE WARRANTY REGISTRATION CARD SHOULD BE ACCURATELY COMPLETED,
MAILED TO AND RECEIVED BY SABINE WITHIN FOURTEEN (14) DAYS FROM THE DATE
OF YOUR PURCHASE.
In order to obtain service under these warranties, you must:
a. Bring the defective item to any Authorized SABINE DEALER and present therewith the
ORIGINAL PROOF OF PURCHASE supplied to you by the AUTHORIZED SABINE DEALER in
connection with your purchase from him of this product.  If the DEALER is unable to provide the
necessary warranty service, you will be directed to the nearest other SABINE AUTHORIZED
DEALER which can provide such service.
OR
b. Ship the defective item, prepaid,  to:

SABINE, INC.
13301 HIGHWAY 441
ALACHUA, FL 32615-8544

i

ncluding therewith a complete, detailed description of the problem, together with a legible copy

of the original PROOF OF PURCHASE and a complete return address. Upon Sabine’s receipt
of these items:
If the defect is remedial under the limited warranties and the other terms and conditions
expressed have been complied with, Sabine will provide the necessary warranty service to
repair or replace the product and will return it, FREIGHT COLLECT, to you, the purchaser.
Sabine’s liability to the purchaser for damages from any cause whatsoever and regardless of
the form of action, including negligence, is limited to the actual damages up to the greater of
$500.00 or an amount equal to the purchase price of the product that caused the damage or
that is the subject of or is directly related to the cause of action.  Such purchase price will be
that in effect for the specific  product when the cause of action arose. This limitation  of liability

will not apply to claims for personal injury or damage to real property or tangible personal
property allegedly caused by Sabine’s negligence. Sabine does not assume liability for
personal injury or property damage arising out of or caused by a non-Sabine alteration or
attachment, nor does Sabine assume any responsibility for damage to interconnected non-
Sabine equipment that may result from the normal functioning and maintenance of the Sabine
equipment.
     UNDER NO CIRCUMSTANCES WILL SABINE BE LIABLE FOR ANY LOST PROFITS,
LOST SAVINGS, ANY INCIDENTAL DAMAGES OR ANY CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT, EVEN IF SABINE HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
     THESE LIMITED WARRANTIES ARE IN LIEU OF ANY AND ALL WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE; PROVIDED,
HOWEVER, THAT IF THE OTHER TERMS AND CONDITIONS NECESSARY TO THE
EXISTENCE OF THE EXPRESS LIMITED WARRANTIES, AS HEREINABOVE STATED,
HAVE BEEN COMPLIED WITH, IMPLIED WARRANTIES ARE NOT DISCLAIMED DURING
THE APPLICABLE ONE-YEAR PERIOD FROM DATE OF PURCHASE OF THIS PRODUCT.
     SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED
WARRANTY LASTS, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT
APPLY TO YOU.  THESE LIMITED WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS,
AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO
STATE.
     THESE LIMITED WARRANTIES ARE THE ONLY EXPRESS WARRANTIES ON THIS
PRODUCT, AND NO OTHER STATEMENT, REPRESENTATION, WARRANTY OR
AGREEMENT BY ANY PERSON SHALL BE VALID OR BINDING UPON SABINE.
          In the event of any modification or disclaimer of express or implied warranties, or any
limitation of remedies, contained herein conflicts with applicable law, then such modification,
disclaimer or limitation, as the case may be, shall be deemed to be modified to the extent
necessary to comply with such law.
          Your remedies for breach of these warranties are limited to those remedies provided
herein, and Sabine gives this limited warranty only with respect to equipment purchased in the
United States of America.

INSTRUCTIONS-WARRANTY REGISTRATION CARD
1. Mail the completed WARRANTY REGISTRATION CARD to:

SABINE, INC.
13301 HIGHWAY 441
ALACHUA, FL 32615-8544

a. Keep the PROOF OF PURCHASE.  In the event warranty service is required during the
warranty period, you will need this document. There will be no identification card issued by
Sabine, Inc.
2. IMPORTANCE OF WARRANTY REGISTRATION CARDS AND NOTIFICATION OF
CHANGES OF ADDRESS:
a. Completion and mailing of WARRANTY REGISTRATION CARDS  - Should notification
become necessary for any condition that may require correction, the REGISTRATION CARD
will help ensure that you are contacted and properly notified.
b. Notice of address changes - If you move from the address shown on the WARRANTY
REGISTRATION CARD, you should notify Sabine of the change of address so as to facilitate
your receipt of any bulletins or other forms of notification which may become necessary in
connection with any condition that may require dissemination of information or correction.
3. You may contact Sabine directly by telephoning (904) 418-2000.
4. Please have the Sabine product name and serial number available when communicating
with Sabine Customer Service.

EXPOSURE TO EXTREMELY HIGH NOISE LEVELS MAY CAUSE A PERMANENT HEARING
LOSS.  INDIVIDUALS VARY CONSIDERABLY IN SUSCEPTIBILITY TO NOISE INDUCED
HEARING LOSS, BUT NEARLY EVERYONE WILL LOSE SOME HEARING IF EXPOSED TO
SUFFICIENTLY INTENSE NOISE FOR A SUFFICIENT TIME. THE U.S. GOVERNMENT’S
OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA) HAS SPECIFIED THE
FOLLOWING PERMISSIBLE NOISE LEVEL EXPOSURES:

DURATION/DAY IN HOURS       SOUND LEVEL IN dBA, SLOW RESPONSE

8

 

90

6

 

92

4

 

95

3

 

97

2

100

1-1/2

102

1

105

1/2

110

1/4 or less

115

ACCORDING TO OSHA, ANY EXPOSURE IN EXCESS OF THE ABOVE PERMISSIBLE LIMITS
COULD RESULT IN HEARING LOSS. EAR PLUGS OR PROTECTORS IN THE EAR CANALS
OR OVER THE EARS MUST BE WORN WHEN OPERATING THIS DEVICE IN ORDER TO
PREVENT A PERMANENT HEARING LOSS, IF EXPOSURE IS IN EXCESS OF THE LIMITS AS
SET FORTH ABOVE.  TO ENSURE AGAINST POTENTIALLY DANGEROUS EXPOSURE TO
HIGH SOUND PRESSURE LEVELS, IT IS RECOMMENDED THAT ALL PERSONS EXPOSED
TO EQUIPMENT CAPABLE OF PRODUCING HIGH SOUND PRESSURE LEVELS SUCH AS
THIS DEVICE BE PROTECTED BY HEARING PROTECTORS WHILE THIS UNIT IS IN
OPERATION.

Section Twelve:  Cautions and Warranties

Summary of Contents for GRAPHI-Q


























































Reviews: