35
EN
• The default TIMER is in oFF position; use buttons
(+) o (-) to select : TIMER oFF (deactivated) or TIM-
ER oN (activated).
See picture 14.17
14.17
Press the “M” button for more than 2 seconds to turn
back to the operation mode.
14.5.2 Programming
• Press the “M” button; the operation mode symbol
will start flashing.
• Press button (+) or (-) until selecting the watch
symbol
• Confirm using the “M” button.
• Press button “+” twice; the abbrevation “Prd” will
be displayed.
• Press the “M” button to confirm.
• The display shows the “on 1” message, start time
of the first day of the week, and message 00:00.
• Using buttons (+) or (-), set the desired activation
time.
• Confirm using the “M” button.
• The display shows the “oF 1” message, off time of
the first day of the week, and message 00:00.
• Using buttons (+) or (-), set the desired deactiva-
tion time.
• Confirm using the “M” button.
• How to program all 7 days is explained below.
Summary of Contents for QCV-MB
Page 3: ...3 IT da p 5 EN from p 23 ...
Page 59: ......
