Sabiana ENY-SP-180, Technical Manual

Page: 26 / 85

24
Energy Smart |
Vertical Version
|
MODES
DIAGRAM
LEGEND
Fresh air
Supply air
Extract air
Exhaust air
Micro pleat filter
Remote or on board control
Electric pre-heater optional only required for
cold climates
Temperature sensor
Humidity Sensor Central Demand Control
Condensate Drainage
The units are configured with the fresh air fan on the front left side and that of the extracted air on the right side. If necessary,
it is possible to invert the flows by inverting the position of the filters, the position of the condensate drain, the position of the
humidity probe (ENY-SP versions only) and paying attention to the proper connection of the ducts to the machine; below is the
standard configuration and the inverted flow configuration
Aria di
espulsione
esausta
Aria esterna
Aria di
immissione
Aria
ambiente
di estrazione
Aria esterna
Aria di
immissione
Aria di
espulsione
esausta
Aria
ambiente
di estrazione
F7 M5 M5 F7
LEFT SIDE CONFIGURATION
DEFAULT
RIGHT SIDE CONFIGURATION
OPTIONAL
Exhaust Air Exhaust Air
Extract Air Extract Air
Fresh Air Fresh Air
Supply Air Supply Air
Main power
board
Main by-pass
damper motor
Secondary
by-pass
damper
motor
Electric pre-heater
Supply fan Extract fan
Heat recovery
system
T-EP