background image

22

Energy Smart | 

Vertical Version

 |

ENY-SP and ENY-S Versions - Construction features of the main components

ENY-SP version external structure

made of hot-dip galvanised steel sheet panels painted in RAL 9003 and satin finish obtained with epoxy paint dried  
in oven at 180 °C; the side panels are insulated with a 25 mm thick padding, while the inspection cover is completely 
removable and is insulated with a 30 mm thick padding.

 

ENY-S version external structure

made of hot-dip galvanised steel sheet panels painted in RAL 9003 and satin finish obtained with epoxy paint dried in 
oven at 180 °C; the inspection cover is completely removable and is insulated with a 30 mm thick padding.

EPDM fan access closure

Polyethylene EPE filter access closure

Electric defrosting pre-heater 

Hot filament electric heater with reinforced metal lining, controlled by PWM signal (only versions with integrated electric 
heater).

High efficiency filters compliant with Standard ISO 16890;

The filters have the following features:

 -ePM

1

 55% - F7 class for the supply air;

 -ePM

10

 50% - M5 class for the extract air.

ABS air distribution connections for inlet/outlet air flows

7/11 Extract air (7) and air supply (11) electric fan

consisting of: 
• Permanent single-phase

 synchronous EC

 motor.

• 

High efficiency ABS fans 

with backward-curved blades.

• ABS

 Motor/fan

 

housing

.

High efficiency static heat recovery unit 

with PET counterflow exchange plates. The reachable efficiency obtainable may be higher than 90% because they ensure 
counterflow heat transfer between two air flows at different inlet temperatures. The static heat recovery units do not 
feature moving parts and guarantee high reliability and safe operation.
In order to increase the efficiency of the heat exchanger, the plate surfaces feature special swirlers.

Main by-pass damper 

made entirely of ABS and motorised with a Valemo actuator.

10  Secondary by-pass damper 

consisting of a steel blade and motorised with a Valemo actuator.

12  T-EP control

Summary of Contents for ENY-SP-180






















































































Reviews: