Sabiana Energy SHP-130, Installation, Use And Maintenance Instructions

Page: 83 / 228

83
English
Type of
Signal
Description of Fault Notes/Solution
no. of
DISPLAY LED
flashes
Err
General Alarm. /
/
FAN1
FAN2
FAN voltage/speed limits ex-
ceeded.
Check FAN connections.
Replace the faulty fan if necessary
4
t1
t2
t3
t4
Faulty temperature probe
Check the probe connections
Replace the faulty probe if necessary
2
AUTO
Air quality probe
Check the air quality probe connection.
Replace the faulty probe if necessary
6
FLtr Filter replacement
Replace the filters of the unit. Perform the reset in the
RESF menu
1
HEAT
Electric antifreeze resistance
fault
Check the resistance reset thermostat;
Check the electrical connections;
Check the electric resistance and replace it if necessary
3
FRSt
Antifreeze Alarm
SEE ANTIFREEZE MANAGEMENT LOGIC TABLE
The FROST alarm resets automatically.
/
FIrE
Fireplace
The
FIRE
indication alternates on the display with the
OFF
indication to report the reason for the standby status
ALARMS
Below is a table for troubleshooting the faults that
may occur during machine operation.