Sabiana Energy SHP-130, Installation, Use And Maintenance Instructions

Page: 77 / 228

77
English
ATTENTION!: in case of use of the
unit with AUTO mode you are
recommended to use the T-EP
remote control to supervise the
indoor humidity.
ENTER
AUto
ENTER
F130
Off
On
ENTER
F150
FLIF
ENTER
180
ENTER
• SETTING THE FILTER REPLACEMENT
FREQUENCY
From the main menu, access the “
TECH
” menu
and press the “
+
” key to display the "
FLIF
” menu.
Press “Enter” to access the menu and display the
set filter replacement period.
The frequency is expressed in days and can be
changed within the range of variability specified
in the table.
Increase the period by pressing the “
+
” button.
Decrease the period by pressing the “
-
” button.
Press “ENTER” to confirm the selected setting.
Press the “
-
“ key to go back to the previous menu
Parameter Description Parameter Name Variability Range Default values
Filter service life Flif 30 - 400 180 (about 6 months)
• SETTING THE AUTOMATIC
VENTILATION MODE
From the main menu, access the “
TECH
” menu
and press the “
+
” key to display the “
AUTO
” menu.
Press “Enter” to access the menu, the mode is set
by default at “OFF”.
To activate it press the “
+ ” button, select “ ON ” and
confirm with the “Enter” key.
Press the “
-
“ key to go back to the previous menu.
The Automatic mode enables operation at var-
iable flow to pursue target air quality values
with respect to the measurements made by the
sensor connected to the machine.
The machine is equipped by standard with a
humidity sensor on the return circuit and the
“
AUTO
” mode activates the operating logic
described in the specific section “ AUTOMATIC
MODE WITH HUMIDITY SENSOR
” .