Sabiana Energy SHP-130, Installation, Use And Maintenance Instructions

Page: 61 / 228

61
English
WK22 2018
230V
50Hz
MAXIMUM
POWER INPUT
ENY-SHP
- - - W
QUALITY
CONTROL
MAXIMUN
CURRENT INPUT
ENY-SHP- ---
- - - A
SIZE
TYPE
IP21
MADE IN ITALY
There is an identification label on each unit bearing
the data of the manufacturer and the machine type.
(See Figure “A”)
- MACHINE IDENTIFICATION
- WASTE DISPOSAL
- USE AND STORAGE
OF THE MANUAL
This instruction manual is intended for the machine
user, owner and technical installer and must always
be available for consultation.
The instruction manual indicates the intended use
of the machine, its technical features and provides
indications as to its correct use, cleaning and ad-
justments. It also provides important indications for
maintenance, for residual risks and in any case to
carry out operations with special care.
This manual must be considered as a part of the ma-
chine and must be KEPT FOR FUTURE REFERENCE
until the final scrapping of the machine.
The instruction manual must always be available for
consultation and preserved in a dry and protected
area.
Should it be lost or damaged, the user can request a
new manual from the manufacturer or retailer, indi-
cating the model and serial number of the machine
shown on its rating plate.
This manual reflects the state of technology at the
time it was prepared. The manufacturer reserves the
right to update production and manuals thereafter
without being obliged to update previous versions
as well.
The manufacturer will not be held liable in case of:
- improper use or misuse of the machine
- use nonconforming to that expressly specified in
this publication
- serious shortcomings in intended and recom-
mended maintenance
- changes to the machine or any unauthorised
intervention
- use of non-original spare parts or not specific for
the model
- total or partial failure to comply with the instruc-
tions
- exceptional events
BEFORE INSTALLING THE UNIT
READ THIS MANUAL CAREFULLY
Residential ventilation units convey fresh air through
the cross-flow heat exchanger and distribute it to
the different rooms by means of a duct distribution
system.
Moist and stale air is extracted and then, again
passing through the cross-flow heat exchanger,
exhausted to the outside of the unit through resi-
dential ventilation.
- SCOPE
Fig.“A”
• Disposal of packaging material:
follow the environmental regulations in force.
•
Disposal of waste electrical and
electronic equipment (WEEE),
pursuant to European Directive
2012/19/EU (WEEE).
The symbol affixed to the product or documenta-
tion entails that, at the end of their service life, the
products should not be disposed of with normal
urban solid waste.
The crossed-out bin symbol is shown on all products
to recall separate waste collection obligations.
(Applicable in countries with separate waste collection systems)