Saba SBA43UHD194, Instruction Manual

Page: 29 / 44

Only use accessories recommended by the manufacturer. Do not use this device for
purposes other than those indicated and do not modify it in any way. Always comply with
the regulations and laws of the country in which you are operating the device.
Explanation of other symbols
The following symbols can be found on the device itself:
This symbol means there is potentially life-threatening high voltage inside the device. For
this reason, you should never open the housing. There are no user serviceable parts
inside.
Protection Class II: This symbol means that the TV set has double insulation and is
subject to the electrotechnical protection Class II.
This symbol means that the TV set supports Dolby Audio technology for improved
sound output.
This symbol means the TV set must be connected to an alternating current
network.
This symbol means that the remote control is supplied with direct current.
Trademarks
Dolby, Dolby Audio and the Dolby logo are trademarks of Dolby Laboratories.
All other trademarks and registered trademarks are the property of their respective owners.
Getting started
Fitting the stand
Before you can install your TV set, you need to fit the stand. Alternatively, you can mount it
on the wall. A Phillips screwdriver is needed to perform the installation.
Setting up the TV set
Place your TV set on a flat, stable surface (e.g. a table or a specially designed TV stand).
Make sure that all cables are laid simply and safely and do not represent a trip hazard. The
device must be connected to a mains socket using the mains cable. This mains socket must
be easily accessible so that the mains plug can be removed immediately in the event of an
emergency.
Fitting the batteries into the remote control
1. Turn the remote control over with its underside facing upwards, insert a finger into the
recess, and push the battery compartment cover in the direction of the arrow. Remove
the battery compartment cover.
6
G
Bluetooth
Bluetooth2.1+EDR/4.215.0
2.402G Hz -2.480G Hz