background image

6

Cautions on installation

x

Please refer to the instruction manuals of any 
components to be connected to this unit. 

x

Do not turn on the power or plug any of the 
components into the wall outlet until all 
connections are secure. 

x

Be sure to unplug the unit from the AC wall 
outlet when connecting audio source equipment 
or speakers. This prevents any possibility of 
sending audio or transient signals to the 
speakers and damaging them.

x

When not in use, we recommend that you leave 
the power for your unit turned off. If you 
experience interference during normal television 
viewing, simply turn the DVD player deck off. 
This is not a malfunction of the unit or the 
television.

x

This unit is a precision device that is constructed 
using extremely accurate technology. Soiling or 
friction affecting the pickup lens or disc drive can 
impair the image quality. At the worst, neither video 
nor audio will be played back. To obtain optimum 
picture quality, the players should be checked
(cleaning and replacement of some parts) every 
1,000 hours. Note that this period varies depending
on the environment (temperature, humidity, dust, 
etc.) in which the player is used

x

Do not connect this unit directly to a VCR. The 
playback picture will be distorted because DVD 
video discs are copy protected.

Discs

The types of discs listed below will play on this 
SABA DVD Player Deck

.

The corresponding logos are indicated on the disc label 
or jacket: 

x

 DVD video discs                                                                     

x

 VCD (Video CD) discs                                   

x

 SVCD discs                                                             

x

 CD-DA (CD audio) discs                             

x

 MP3 audio discs                                                   

x

 CDR and CDRW data discs       

Recordable

ReWritable

The following discs will not be play: 

x

 Photo CD, CD-G, CD-Extra, CD-ROM, and DVD-ROM discs 

are not designed to play with this system. 

x

    You cannot play illegally produced discs.     

x

 You cannot play disc that are dusty, soiled, scratched or 

marked with fingerprints. 

x

 DVD discs with a Region Code other than the one      for 

which this player is set.

Manufactured under license from Digital Theater System, Inc. 

US Pat. No. 5,451,942 and other worldwide patents issued and 

pending. “DTS” and “DTS Digital Surround” are trademarks of 

Digital Theater System, Inc. 

¤

1996 Digital Theater Systems, 

Inc. All rights reserved. 

Summary of Contents for 31-5023





































Reviews: