28
Other functions
Operating the radio
The receiver has a built-in tuner that allows for AM/FM
radio function.
Manual tuning
1. Connect the FM and AM antenna accordingly
ΰ
see
“Connecting the Antenna” on page 12 section for
details
α
2. Press the
POWER
button to switch on the receiver.
3. Press the
SOURCE
button to enter TUNER mode.
4. To select band, press the
SOURCE
button to toggle
between AM/FM modes.
5. Tune the stations by pressing the
TUNE
or
TUNE
buttons repeatedly until the desired station is found.
NOTE: To activate the automatic search function, press
and hold the
TUNE
or
TUNE
buttons for about 2
seconds. In this mode the receiver will automatically
tune frequencies until it finds a station.
Selecting Mono or Stereo Sound
Press the
AUDIO (ST/MO)
button on the remote
control to switch between mono and stereo sound in FM
tuner mode (when available).
Note: After pressing the
TUNE or TUNE
,
MEM or
MEM
buttons, the listening mode will automatically
change to stereo.
Storing radio stations:
You can easily enter and store up to 40 AM or FM radio
stations in the receiver’s memory.
POWER
AUDIO(ST/MO)
SOURCE
TUNE +/-
MEM +/-
NUMBER
BUTTONS
Manual preset
1. Select FM or AM band by pressing the
SOURCE
button
repeatedly.
2. Tune to the radio station to be stored by pressing the
TUNE
or
TUNE
buttons on the remote control.
3. Press the
SLOW/MEM
button on the remote control.
“PROG” and the preset number will appear on the front
panel display.
4. Press the
MEM
,
MEM
, or enter the number buttons
ΰ
0
~
9
,
>10
α
, while “PROG” is still appearing to select
the desired preset memory location.
5. Press the
SLOW/MEM
button on the remote control to
store a frequency in the preset location
.
6. Repeat steps 1-5 to store other frequencies.
Retrieving preset stations
1. Press the
SOURCE
button to select tuner mode.
2. Press the
MEM
or
MEM
buttons on the front panel
or remote control to select preset stations.
POWER
SOURCE
SKIP//-
