6
TMS(Time Shift)
Press this button to display Time Shift info bar.
Play
To play the MP3, JPEG, or Record files.
Stop
To stop the Time Shift, recording, or MP3/JPEG player.
PAUSE
Used to select the freeze function.
Press once to freeze the screen picture.
FB
To start Fast Backward function.
FF
To start Fast Forward function.
SB
To start Slow Backward function.
SF
To start Slow Forward function
/
PREV/NEXT
Switch to preview or next file in play mode
5. Front panel/Rear Panel
Please refer to the diagram above for all possible connections of your receiver
Do not connect the unit to the mains socket until all other connections have been made and checked.
LNB IN
13/18V 400mA MAX:
This port is to connect the coaxial cable from LNB of your Dish.
AV OUT:
This RCA connector is used to connect TV using RCA cable.
HDMI:
Audio and Video output socket for TV set with HDMI Input Jack only.
RS 232
SERIAL PORT: This is used to connect your receiver to a computer through a serial cable.
USBA/B :
USB 2.0 Host, connect to USB hard disk, or flash disk
and 3G dongles
.
IR IN:
Connect an External IR-Sensor (Infrared).
Ethernet:
Network port, you can get a new software updates from this port.
DC 12V:
This is used to connect an external 12V adapter.
Card Slot:
One CA Interface for Conax.
(on the right side of the receiver)
6. Connecting Your System
There are two ways to connect the receiver to your existing TV system. We recommend using one of
the following cases for the best result: