Box 2, Bag for page 29
Carbon Rod
Support
(H1310-S)
Before installing the plastic link on the threaded rod, be sure that you have waited at least 12 hours for the glue to fully cure.
Plastic Ball Link
(H0066-S)
Plastic Ball Link
(H0066-S)
NOTE:
Before installing the plastic link onto the ball,
be sure the tail push rod moves smoothly.
You can open up H1310-S if you need to.
NOTE:
The carbon rod is slightly bent, generating a little preload against the
carbon rod support.
Approx 633mm
M2.5x12
(HC026-S)
Page 29
TAIL BOOM ASSEMBLY
