Front FBL Position
Rear FBL Position
Box 1, Bag for page 31
NOTE:
2mm thick tape for the gyro is recommended.
Note:
Tighten by hand.
Overnightening can
damage the dampeners.
Rubber 65 shore
(HC573-S)
Note:
Tighten carefully.
Overnightening can
damage the dampeners.
Flat Head Cap
Screws M3x5mm
(HC132-S)
CF FBL Mount
(H1237-S)
Alu FBL Support
(H1625-S)
FBL/RX PLATE ASSEMBLY DAMPENERS OPTION
CF RX Mount
(H1399-S)
Socket Head Cap
Screws M3x6mm
(HC044-S)
NOTE:
Use this plate if you
have separate RX.
If you do not want to use the dampeners, you can setup a rigid FBL mount support using the screws
and bushings supplied in bag 33-2
CANOPY BASE ASSEMBLY LEFT SIDE
Canopy Base
Support
(H1440-S)
Socket Head Cap
Screw M3x8mm
(HC050-S)
Canopy Mount Base
(H1101-S)
FBL POSITION
Canopy Mount Base
(H1101-S)
Socket Head Cap
Screw M3x8mm
(HC050-S)
CANOPY BASE ASSEMBLY RIGHT SIDE
Finishing
Washer M3
(H0007-S)
Canopy Base
Support
(H1440-S)
Finishing
Washer M3
(H0007-S)
Page 31
INSTALLATION FBL/RX
