Button Head Cap
Screw Special M2.5x6mm
(HC019-S)
Wire Support
(H1107-S)
Socket Head Cap Screw M2.5x8
(HC020-S)
Finishing
Washer M2.5
(H0255-S)
BAGs 24.1, 28, 29
In bag 28, you can find a “3D Printed” antenna support.
Use it as desired with your RX system.
Antenna
Support
[H1134]
Double Side-Tape
(HA035-S)
NOTE:
You can wait to tighten this
screw until after you run all
of your cables.
EXTRA SUPPORT
BAG 29
Nylon Nut M3
(HC206-S)
Flat Head Cap
Screws M3x10
(HC135-S)
Battery Backup
Support
(H1241-S)
NOTE:
You will need to cut about 60mm
off the front of the wire support.
Finishing Washer M2.5
(H0255-S)
Socket Head Cap
Screw M2.5x8mm
(HC020-S)
Socket Head Cap
Screw M2.5x8mm
(HC020-S)
Finishing
Washer M2.5
(H0255-S)
CF Wire Support
(H1383-S)
Nylon Nut M2.5
(HC200-S)
Page 33
INSTALLATION FBL/RX
