TAIL BELT TENSION
To provide the correct tail belt tension, you can use the
"zig-zag"
method.
Figure 1
, Loosen the 2
RED
screws and the
BLUE
and push the tail side plate in according with red arrow. Tighten the
BLUE
screw while you are pushing.
Figure 2
, Loosen the 2
RED
screws and the
YELLOW
and push the tail side plate in according with red arrow. Tighten the
YELLOW
screw while you are pushing.
You can proceed step by step until the tail belt is tight enough.
Hard 3D style will require more tension; Sport flight style less.
When you set your perfect tension, you can tighten all screws making sure the tail shaft is perfectly straight.
(
Figure 3
, tail output shaft must be perpendicular with the boom).
Page 30
ASSEMBLING OF THE MODULES
