CANOPY
*Install Canopy grommets
(Figure.1)
and the two quick knobs
(Figure.2)
*Fit the canopy in the red arrow zone, and insert the knobs.
*Confirm the canopy is secure prior to each flight.
Canopy Grommet
(HA021-S)
Quick Knobs
Kraken 580
Nitro Canopy
(H1381-S)
BAG26
NOTE:
Put a very small drop of CA glue on the grommets and then
insert the quick release canopy mounts. Doing so will prevent
the canopy mounts coming off when removing the canopy.
Be careful not to get CA glue on the quick release mechanism
as this will affect the operation of the mechanism itself.
NOTE:
To keep the canopy perfectly centered on the helicopter,
you can add 2 strips of 4mm foam to the fan shroud.
Page 36
INSTALLATION CANOPY