Black plate (30,1)
Saab 9-4X Infotainment System - 2012
30
Infotainment System
Do not touch the bottom surface of
a disc while handling it; this could
damage the surface. Pick up discs
by grasping the outer edges or the
edge of the hole and the outer edge.
If the bottom surface of a disc is
dirty, take a soft lint
‐
free cloth,
or dampen a clean soft cloth in a
mild neutral detergent solution
mixed with water, and clean it. Wipe
the disc from the center to the
outer edge.
Care of the CD Player
Do not add a label to a disc, as it
could get caught in the CD player.
If a label is needed, label the top of
the recorded disc with a
marking pen.
Do not use disc lens cleaners
because they could contaminate the
lens of the disc optics and damage
the CD player.
Notice:
If a label is added to a
CD, more than one CD is inserted
into the slot at a time, or an
attempt is made to play scratched
or damaged CDs, the CD player
could be damaged. While using
the CD player, use only CDs in
good condition without any label,
load one CD at a time, and keep
the CD player and the loading slot
free of foreign materials, liquids,
and debris.
Control Buttons
The buttons used to control the CD
player are:
CD:
Press to use the CD player.
SEEK
r
t
:
Press to select the
previous track or press and hold to
rewind within a track.
SEEK
u
[
:
Press to select the
next track or press and hold to fast
forward within a track.
INFO:
Press to display additional
information about the current track
that may be available.
TUNE/
k
:
Press to play or pause
the current track. Turn to select
tracks.
MENU/SELECT:
Turn to enter the
menu; press to select an item.
Y
(Eject):
Press to eject the disc.
Inserting a CD
With the printed side facing up,
insert a disc into the CD slot until it
is drawn in.
Removing a CD
Press
X
. The disc is pushed out of
the CD slot. If the disc is not
removed after it is ejected, it is
pulled back in after a few seconds.
Playing a CD or MP3 CD
Press the CD button. If there is a
disc in the player, it begins playing.
Information about the disc and
current track is shown on the
display depending on the data
stored.
