32 025 682 19
Saab 9-3 5D M06-
121Route the fibre optic cable along the normal wir-
ing harness to the DVD unit
122Remove the protective cover from the fibre optic
cable's connection and fit it in position 2 in a
fibre optic connector from the kit.
123Remove the protective cover from the short
extra fibre optic cable's connection and fit it in
position 1 in the same connector.
124Fit the locking clip.
125Plug the fibre optic connector into the DVD unit's
connector casing and plug it into the DVD unit.
126Unplug the fibre optic cables' connector (the
small connector) from the telematics unit's
connector.
127Remove the fibre optic cable connected to posi-
tion 2 by opening the connector locking clip and
carefully lifting the hook.
128Remove the protective cover on the fibre optic
cable from the DVD unit and fit it in position 2 in
a fibre optic connector from the kit. Fit the pro-
tective cover on the loose fibre optic cable.
129Fit the locking clip.
130Plug the fibre optic connector into the large con-
nector and plug it into the telematics unit.
Important
Handle the fibre-optic cables with care or the sig-
nal may be distorted.
·
It is very important that the two leads in the
connector are not confused with one another.
·
Do not bend the cable in a radius smaller than
25 mm.
·
Keep the cable ends free from dirt and grime.
·
The cable should not lie against any sharp
edges as this may cause increased signal
reduction.
F930A464
128
129
130
126
123
123
127
