10 32 025 682
Saab 9-3 5D M06-
35 Remove the cover from the cable duct, check
that the green marked fibre optic cable cannot
bend and fit it in position 1 in the amplifier's fibre
optic connector. Fit the locking clip.
36 Plug the fibre optic connector into the large
connector.
37 Fit the cover to the cable duct, draw back the
carpet and guide out the connector and the
cables through the hole in the carpet.
38 Connect and fit the amplifier.
Cars with integrated phone:
Go to step 49.
Important
Handle the fibre-optic cables with care or the sig-
nal may be distorted.
·
Do not bend the cable in a radius smaller than
25 mm.
·
Do not expose the cable to impact as this may
cause the transparent plastic to whiten,
thereby reducing the intensity of the light and
causing possible communication interruptions.
·
The cable should not lie against any sharp
edges as this may cause increased signal
reduction.
F930A455
38
35
35
38
35,37
36
