700-1000 - B
June - 2010
8
UNPACKING & ASSEMBLY INSTRUCTIONS
REFER TO DIAGRAM (page 5) FOR PARTS IDENTIFICATION.
READ THESE INSTRUCTIONS IN THEIR ENTIRETY BEFORE UNCRATING PAL
Prior to opening pallet, inspect external condition for any visible damage. It is important that any
damage be noted on the Bill of Lading. Immediately notify S.R. Smith or your Authorized Reseller
of missing or damaged parts.
The PAL is shipped on a covered pallet and is VERY HEAVY. You will need the following tools for
unpacking and assembly:
•
3/4” or 19mm socket wrench
•
9/16” or 14mm socket and 9/16” or 14mm wrench
•
small flat blade screwdriver
•
knife or cutters to cut shrink-wrap/bands.
