700-1000 - B
June - 2010
10
14. Insert actuator cable (green stripe with the “o” ring) into connector #1 on the Control Box. Make sure
plug is secure.
15. Insert 24v motor cable (red stripe) into connector #2 on the Control Box. Make sure plug is secure.
16. Return housing to normal position and insert handle over mounts.
17. Remove and unwrap hand control from accessory carton. Insert plug into large connector on the
Control Box and hang hand control on handle. Make sure plug is secure.
18. Attach battery to Control Box mounted on housing.
19. Cover Control Box and battery with Console/Battery Cover to protect from moisture.
20. Fully extend both stabilizer bars and fully lock both rear wheels to prevent movement.
21. Check up and down controls for proper operation.
22. Check side to side controls for proper operation.
23. Attach seat assembly with bolt and thumbnut in appropriate hole. For storage, seat can be attached
facing inward for less space.
24. Attach foot rest to seat with bolts and thumbnuts.
