700-1000 - B
June - 2010
16
4. Check connection cable for damage.
5. Reverse the motor cables as follows: Locate the area on the Control Box where the
cables are attached. Remove the actuator cable from connector #1 and replace it with the
24v motor cable from connector #2. Activate the up and down buttons on the hand
control. If lift rotates, the problem is likely the hand control. If lift does not rotate, the
problem is likely the 24v motor. If this happens contact your Authorized Reseller or S.R.
Smith for replacement information.
Does lift raise or lower?
No.
1. Check battery charge level.
2. Check battery connection.
3. Use another fully charged battery. If lift continues to not function, replace the Control
Box.
Lift does not Raise or Lower
Does lift rotate?
Yes.
1. Check connection to Control Box. Be sure plug is pushed in all the way.
2. Check hand control connection to Control Box for damaged pins.
3. Check connection cable for damage.
4. Locate Emergency Buttons on top of Control Box. Activate these buttons using a ball
point pen. If lift operates properly, the problem is likely the hand control. If lift does
not operate properly, the problem is likely the actuator.
Does lift rotate?
No.
1. Check battery charge level.
2. Check battery connection.
3. Use another fully charged battery. If lift does not function, replace the Control Box.
LONG-TERM STORAGE
When storing the lift for an extended period of time:
•
Wash seat with disinfection solution and then rinse with fresh water and dry entire lift
•
Spray gear assembly with a heavy duty rust inhibitor and lubricant such as LPS 3 - Heavy-Duty
Inhibitor
•
Keep the battery on the charger in a dry temperature controlled area
•
Cover unit and store in a dry location away from pool chemicals
Questions/Comments - Contact us at 800.824.4387 or 503-266-2231 or [email protected]. For
information regarding Authorized Resellers worldwide visit www.srsmith.com
WARRANTY INFORMATION
S.R. Smith, LLC warrants to the original retail purchaser that products manufactured by S.R. Smith, when properly assembled and
installed in accordance with S.R. Smith’s assembly and installation instructions, and properly used and maintained, shall be free
from defects in material and workmanship for a period of three (3) years from the date of original manufacture except for the
following items: WetDek™ (1 year) and PoolSonix™ (2 years). The original retail purchaser must follow the procedure set forth
below when submitting a warranty claim. S.R. Smith will repair or replace, at its option, the product, and return it to the owner freight
prepaid. Determination of repair or replacement shall be solely at the discretion of S.R. Smith. Aquatic lift systems, components
and batteries have a separate warranty, set forth below.
