background image

700-3000  6.21.2016 

18

LONG-TERM STORAGE 

 
When storing the lift for an extended period of time: 
 

  Wash seat with disinfectant solution and then rinse with fresh water and dry entire lift 

  Spray gear assembly with a heavy duty rust inhibitor and lubricant such as LPS 3 - Heavy-Duty 

Inhibitor  

  Keep the battery on the charger in a dry temperature controlled area 

  Cover unit and store in a dry location away from pool chemicals    

 

 

Questions/Comments - Contact us at 800.824.4387 or 503-266-2231 or [email protected]. For 

information regarding Authorized Resellers worldwide visit 

www.srsmith.com

 

 
 

WARRANTY INFORMATION 

The S.R. Smith warranty becomes effective on the date of manufacture.

 

To initiate a warranty replacement, Please follow the process outlined below. 

1. 

Take photos of the damaged product.

 

a) The photo must include the entire unit  
b) Also include one photo or more of the damaged area. 

2. 

Write down or take a photo of the serial # sticker from the product.

 

S.R. Smith provides a serial # for every pool lift we produce. The sticker with the serial number 
can be found at the bottom of the mast near the base. 

3. 

Attach the photos and the serial # to a written request for replacement under the S.R. 
Smith warranty.

 Please include the following information:  

a) Product name and description.  
b) Date of purchase and/or date of installation. 
c) Description of damage. 
d) Shipping address with a contact name and phone number. 

4. 

Send photos, serial # sticker and your written request by email or mail to 
[email protected] or:

  

S.R. Smith, LLC 
PO Box 400 
1017 SW Berg Pkwy 
Canby, OR 97013 
Attn: Warranty Specialist 

**

NOTE

: Missing information will result in a processing delay and possibly denial of your claim. 

Should you have any questions regarding this process, please contact 

S.R. Smith's Warranty specialist at 800.824.4387 or 503.266.2231 or email [email protected] 

 

 
 

 

SPECIFICATIONS 

 

aXs EU/K 

Summary of Contents for aXs 1000























Reviews: