700-3000 6.21.2016
16
Optional accessories may be purchased for your aXs lift through your Authorized Reseller. The following
accessories are available:
Console/Battery Cover – P/N 910-1000:
Protects battery and control unit from exposure to moisture
Total Cover - P/N AX9005:
Made of weather resistant nylon material to keep unit protected from
elements when not in use.
Spine Board Attachment - P/N 500-1000:
Can be used to convert lift for use with any standard spine
board. (Spine Board not included)
Anchor & Cap – P/N 300-6200L -
Lift Lock deck anchor measures 2.875”/ 7.30 cm OD, 2.75” / 6.98 cm
ID. Includes cap and bonding screw.
MAINTENANCE and CLEANSING
Minimal maintenance will prolong the life of your lift. Keep all electronic components clean and dry.
Excessive moisture collection can affect battery and lift performance and could lead to battery failure
and/or the lift failing to operate. If the lift is used outdoors, an optional full cover is available and
recommended.
Owners of lifts should be aware of any applicable local, state/provincial or federal/national regulations
regarding the inspection and or testing of lifts.
The following schedule shall be performed to insure proper operation with the Daily items
performed before each use:
Maintenance Performed
Daily
Weekly
Monthly
Check battery level before each use / Charge battery daily
Wipe Control Box and battery connection with a clean dry rag
Examine lift for any damage, lose or missing hardware
Test for normal operation
Spray gear assembly with a heavy-duty rust inhibitor/lubricant
such as LPS 3 - Heavy-Duty Inhibitor
Make sure all cable connections are properly secured
Inspect lift frame, mast, support arm and seat assembly for rust
Cleansing Performed – after each use
Rinse seat and seatbelt with fresh water between each use -
Cleanse seat and seatbelt with a disinfectant solution of 1:100
dilution of household bleach to fresh water and then rinse with
fresh water and dry entire lift daily. In the event of a
contamination incident such patient/user excreta - cleanse seat
and seatbelt immediately with the disinfectant solution*
Cleanse all battery connections with a nylon scouring pad
Cleanse all metallic surfaces with a cleaner wax to maintain the
finish of the lift
* When using the disinfection solution avoid direct contact with the skin and eyes. In the event of
a contamination incident - immerse the seat belt or in the disinfection solution for 10 min. and
then rinse thoroughly with fresh water.
