CompTrol Interface V4.0.x | Issue 21-05-2021 | 1000932 89
Program 10 – direct frequency request with the CompTrol Master
No. Name
No. Name
1
X/Y remote control bus
2
External electrical supply (see “Table 5: Type
of electrical supply” on page 17)
3
Digital outputs
X4a-I
Alarm signal
4
Digital outputs
X4b-II
,
X4c-III
(see “Table 71: Digital outputs in program
5
Digital input
X2a-D1
remote ON/OFF
(terminal is inactive in program 10)
6
Digital input
X2a-D2
Cooling/Heating mode
(terminal is inactive in program 10)
7
Digital input
X2b-D3
Center/
Center-Remote
(terminal is inactive in program 10)
8
Digital input
X2b-D4
evaluate analog
input
(terminal is inactive in program 10)
9
Digital input
X2c-D5
fan speed
F1
;
D5+D6
fan speed
F3
(terminal
is inactive in program 10)
10
Digital input
X2c-D6
fan speed
F2
;
D5+D6
fan speed
F3
(terminal
is inactive in program 10)
11
Input voltage 24-230 V AC / 20-130 V DC
(terminal is inactive in program 10)
12
CompTrol Interface expansion module
13
Pin header
S4
for setting the analog signal
type (analog input X3)
(terminal is inactive in program 10)
14
Analog input
X3-S, X3-(-RV)
(terminal is inactive in program 10)
15
Pin header
S7
for setting the analog signal
type (analog input X3)
(terminal is inactive in program 10)
16
Pin header
S6
for setting the electrical
supply
(see “Table 5: Type of electrical supply” on
)
17
Pin header
S5
for setting the electrical
supply
(see “Table 5: Type of electrical supply” on
)
-
-
16.2.2 Connection diagram: Connecting CompTrol Interfaces to the CompTrol Master
Procedure
1.
Connect two to five CompTrol Interfaces to the CompTrol Master as shown in the following
connection diagram.
Note
●
For installing, connecting, and wiring CompTrol Interfaces in combination with a CompTrol
Master for program 10, see the CompTrol Master Technical Manual. Program 10 is available
with CompTrol Interface V4.0.3 or higher.
Summary of Contents for CompTrol
Page 125: ......
