2. TERMINAL
2. TERMINAL
DESCRIPTION
DESCRIPTION
2. FRONT PANEL DESCRIPTION
2. FRONT PANEL DESCRIPTION
2.1 MEASURED AND DISPLAYED MEASUREMENTS
2.1 MEASURED AND DISPLAYED MEASUREMENTS
2.1.1 DISPLAYED PAGES
2.1.1 DISPLAYED PAGES
•
Graphical interface showing all power sources with their contactors states, voltages,
frequencies, currents and power in KW.
Display
Display
Notes
Notes
The line-neutral and line-line voltages are all
measured. The voltage displayed is either
fixed on one voltage or allowed to scroll
automatically between all six voltages (RN,
SN, TN, RS, ST, and TR). The ESC
ESC push
button is used to switch between the two
display modes.
•
Statuses page that shows the status of each power source.
Display
Display
Notes
Notes
Refer to section 2.3 for the available status
displayed
•
Separate page for each power source showing the status, contactor state, scrolling voltages,
frequency, currents and power in KW.
Display
Display
Notes
Notes
The ESC
ESC push button is used to start/stop
the voltages scrolling.
Long press on the Select
Select push button for 3
seconds resets the occurring fault.
•
Page showing the running hours for each generator and The Omega operating mode currently
selected.
Display
Display
•
Page showing the running hours for each generator and The Omega operating mode currently
selected.
Display
Display
7