S.& A.S. OMEGA v1.0, User Manual, Page: 11 / 44

2. TERMINAL 2. TERMINAL
DESCRIPTION DESCRIPTION
2.4 MENU DESCRIPTION 2.4 MENU DESCRIPTION
2.4.1 PASSWORD
2.4.1 PASSWORD
A password is required for accessing the menu. The password consists of 4 digits. Two passwords can access
the menu. The first is provided by S. & A.S. Co. Ltd. and is referred to as client password. This password can
only be changed by S. & A.S. Co. Ltd. The second password is referred to as the user password. The user
password can be modified in the menu. The client password accesses all the items in the menu whereas the
user password is denied access to some of the menu items.
2.4.2 ACCESSING THE MENU 2.4.2 ACCESSING THE MENU
Follow the steps described below to access the menu:
1.
Press the Select push button once. You will be prompted to enter a four-digit code. The default
password is 0000.
2.
Use the UP and DOWN push buttons to scroll to the desired number.
3. Press the Select push button. "*" replaces the first digit.
4. Repeat steps 2 and 3 until all four digits are entered.
5. If the entered password is valid, the user will have access to the menu below for 10 minutes without
the need to re-enter the password for every menu access.
While in the menu, if no push buttons are pressed for 25 seconds or if the ESC button is pressed, the system
will automatically exit the menu.
While editing a parameter in the menu, if no push buttons are pressed for 10 seconds or if the ESC button is
pressed, the system will automatically exit the edit mode.
While in the menu, The UP/DOWN push buttons are used to scroll up/down the submenus or the parameters
list. The Select push button accesses the submenu or edits the parameter.
While editing a parameter in the menu, The UP/DOWN push buttons are used to increment/decrement the
parameter value. The Select push button saves the changes done on the parameter edited.
2.4.3 SUBMENUS 2.4.3 SUBMENUS
What you see on the display Descrip on Visibility Condition
Con fi gura on Con fi gura on sub menu N/A
Genset Generator sub menu N/A
U lity U lity sub menu For MGG & MG installa on type
Modbus Modbus sub menu Modbus Hardware Available
Ethernet Ethernet sub menu Ethernet Hardware Available
LCD Display LCD Display sub menu N/A
SD Card SD Card sub menu SD Card Hardware Available
View Faults View faults At least one fault exists
Erase Faults Erase faults At least one fault exists
11