![background image](http://html1.mh-extra.com/html/ryobi/xms-2400/xms-2400_owners-operating-manual_1506341004.webp)
3
Since the sanding paper is attached with a hook and loop
fastener, just align the holes on the sanding pad with the holes
on the sanding paper and press the sanding paper to easily
attach it to the tool.
Sand paper (#60, #120, #240 x 2pcs each)
Always remove the battery pack before attaching and replacing
the sanding paper.
Never cover air vents since they must always be open for
proper motor cooling.
Always start the sander before applying it to the workpiece.
Move the sander evenly over the entire area. The weight of the
sander alone is sufficient for normal use. Any excess pressure
will retard the sanding action, leave an uneven finish and cause
extra wear to both the tool and the sanding paper. Never operate
the sander in one place for too long or excessive material will
be removed.
Always lift the sander off the workpiece before turning it off.
The sander should never be turned off while resting on the
workpiece or when removing material.
Do not use the sander without sand paper or the rubber pad
will be damaged.
1. On/off switch
2. Sanding pad
3. Battery clip
4. Battery pack (Not included)
5. Sanding paper
1. Make sure that the tool is only connected to the voltage
marked on the name plate.
2. Never use the tool if its cover or any bolts are missing. If
the cover or bolts have been removed, replace them
prior to use.
Maintain all parts in good working order.
3. Always secure the tool when working in elevated
positions.
4. Never touch the blade, drill bit, grinding wheel or other
moving parts during use.
5. Never start the tool when its rotating component is in
contact with the work piece.
6. Never lay the tool down before its moving parts have
come to a complete stop.
7.
ACCESSORIES:
The use of accessories or attachments
other than those recommended in this manual might
present a hazard.
8.
REPLACEMENT PARTS:
When servicing use only
identical replacement parts.
1. Be aware that since this tool does not have to be plugged
into an electrical outlet, it is always in operating condition.
2. First, charge the battery.
3. Be sure the battery holder is securely snapped in place.
4. When not in use, lock the trigger.
5. When operating at high places, be aware of things below
you.
6. Never wet the sanding surface since electric shocks may
result.
INSTRUCTIONS FOR SAFE HANDLING
CORDLESS SANDER SAFETY PRECAUTIONS
Li-ion batteries must be recycled.
Take the battery to the shop from which it was purchased as
soon as the post-charging battery life becomes too short for
practical use.
Do not discard the exhausted battery.
DISPOSAL OF THE EXHAUSTED BATTERY
DESCRIPTION
Voltage .........................................................................18V
Pad size ................................................140 x 140 x 80mm
No load orbit .....................................................12,000min
-1
Net weight (not incl. battery pack) ....……..….........…0.9kg
SPECIFICATIONS
STANDARD ACCESSORIES
COMPATIBLE BATTERY PACK AND CHARGER
SWITCH (Fig. 1)
ATTACHING SANDING PAPER (Fig. 2)
To install battery pack, depress the on/off switch to the “O”
position to make sure the tool is in OFF condition. Align the
body with the groove in the battery pack and push in the
direction of the arrow until the battery pack is secured on the
tool.
To remove the battery pack from the tool, push the battery clip
(3) on and remove the battery pack in the direction of the
arrow.
Always remove battery pack from your tool when you are
assembling parts, making adjustments, cleaning, or when not
in use. Removing battery pack will prevent accidental starting
that could cause serious personal injury.
INSTALLING AND REMOVING BATTERY PACK
(Fig. 3)
OPERATION
This tool is started by depressing the on/off switch (1) to the
“I” position. To stop the tool, depress the on/off switch, to the
“O” position.
WARNING!
Prior to connecting the sander to the battery
pack ensure the on/off switch is in the OFF (O) position. If it
is in the ON (I) position when connected to a battery pack,
the tool will start immediately, this could potentially result in
bodily harm or material damage.
BATTERY PACK (not included) ...... XB-1500, XB-3000
CHARGER (not included) ............... XPP-2700
Summary of Contents for XMS-2400
Page 1: ...XMS 2400 09 16 ...
Page 2: ...1 3 1 2 Battery pack 4 not included 1 2 5 3 4 2 3 4 5 ON OFF 1 ...
Page 6: ...5 NOTE ...
Page 7: ...6 NOTE ...