EINHELL WZDS 75 K User Manual Download

Page: 1 / 50

AFTER SALES SUPPORT

0151 649 1500

1890 94 62 44

www.einhell.co.uk

75W DETAIL SANDER – WZDS 75 K

General information

Congratulations!

You have made an excellent choice with the purchase of this quality

Workzone® product.

By doing so you now have the assurance and peace of mind which

comes from purchasing a product that has been manufactured to

the highest standards of performance and safety, supported by

the high quality standards of ALDI.

We want you to be completely satisfied with your purchase so this

Workzone® product is backed by a comprehensive manufacturer’s

3 year warranty and an outstanding after sales service through our

dedicated Helpline.

We hope you will enjoy using your purchase for many years to come.

If you require technical support or in the unlikely event that your

purchase is faulty please telephone our Helpline for immediate

assistance. Faulty product claims made within the 3 year warranty

period will be repaired or replaced free of charge provided that

you have satisfactory proof of purchase (keep your till receipt safe!).

This does not affect your statutory rights. However, be aware that

the warranty will become null and void if the product is found to

have been deliberately damaged, misused or disassembled.

The Declaration of Conformity for the Workzone® 75W Detail Sander – WZDS 75 K is

printed on page 49 of this User Manual.

Declaration of conformity (see chapter 'Declaration of conformity').

Products marked with this symbol meet all applicable Community

regulations for the European Economic Area.

77014_4460595_11016_UG.indd 7

18/04/2017 1:17 pm

Summary of Contents for WZDS 75 K



















































Search results

Summary of Contents for WZDS 75 K

Reviews:

Related manuals for WZDS 75 K

Brands by name

Popular brands

EINHELL WZDS 75 K, User Manual

Search results

Summary of Contents for WZDS 75 K

Reviews:

Related manuals for WZDS 75 K

Brands by name

Popular brands