background image

Page 3  — English

  Use caution when positioning the pressure washer 

for use. 

Warm air from the engine could cause discol-

ored spots on grass.

  Never direct a water stream toward people or pets, 

or any electrical device.

 

฀Before  starting  any  cleaning  operation, 

close doors 

and windows. Clear the area to be cleaned of debris, 
toys, outdoor furniture, or other objects that could create 
a hazard.

 

฀Never pick up or carry a machine while the engine is 

running.

  Never start the machine 

if ice has formed in any part 

of the equipment.

  Do not use acids, alkalines, solvents, flammable 

material, bleaches, or industrial grade solutions 

in this product. These products can cause physical 
injuries to the operator and irreversible damage to the 
machine.

  Always operate the machine

 on a level surface. If the 

engine is on an incline, it could seize due to improper 
lubrication (even at the maximum lubricant level).

  WARNING: High pressure jets can be dangerous 

if subject to misuse. 

The jet must not be directed at 

persons, animals, electrical devices, or the machine 
itself.

 

Hold the trigger handle securely with both hands. 

Expect the trigger handle to move when the trigger is 
pulled due to reaction forces. Failure to do so could cause 
loss of control and injury to yourself and others.

 

Never attempt to make any adjustments while the 
engine (motor) is running 

(except where specifically 

recommended by the manufacturer).

  Protective covers must always cover rotating parts 

when the engine is running.

 

Keep cooling air intake 

(starter grip and rope area) 

and muffler side of the engine at least 3 feet away from 
buildings, obstructions, and other combustible objects.

 

Keep the engine away from flammables and other 
hazardous materials.

 

Keep away from hot parts. 

The muffler, exhaust gases, 

and other engine parts become very hot. Do not touch the 
muffler or place any body parts in the path of hot exhaust 
gases, which can cause burns and other serious personal 
injuries.

 

Do not touch the spark plug and ignition cable 

when 

starting and operating the engine.

  Check fuel hoses and joints

 for looseness and fuel 

leakage before each use.

  Check bolts and nuts

 for looseness before each use. 

A loose bolt or nut may cause serious engine problems.

 

Always refuel outdoors. 

Never refuel indoors or in a 

poorly ventilated area.

 

Never store the machine with fuel in the fuel tank  
inside a building

 where ignition sources are present, 

such as hot water and space heaters, clothes dryers, 
and the like.

 

If the fuel tank has to be drained, do this outdoors into 
a container approved for gasoline and away from all 
ignition sources.

 

To reduce the risk of fire and burn injury, 

handle fuel 

with care. It is highly flammable.

 

Do not smoke while handling fuel.

 

Add fuel before starting the engine. 

Never remove the 

cap of the fuel tank or add fuel while the engine is running 
or when the engine is hot.

 

Loosen fuel cap slowly 

to release pressure and to keep 

fuel from escaping around the cap.

 

Replace all fuel tank and container caps securely.

 

Wipe spilled fuel from the unit.

 Move 30 feet away from 

refueling site before starting engine.

 

If fuel is spilled, 

do not attempt to start the engine, but 

move the machine away from the area of spillage and 
avoid creating any source of ignition until fuel vapors 
have dissipated.

 

Never attempt to burn off spilled fuel under any 
circumstances.

 

Before storing, allow the engine to cool for 30 minutes  
and drain fuel from the unit.

 

Store fuel in a cool, well-ventilated area,

 safely away 

from spark and/or flame-producing equipment.

 

Store fuel in containers 

specifically designed for this 

purpose.

 

Empty fuel tank and restrain the unit from moving 

before transporting in a vehicle.

 

When servicing use only recommended or equivalent 

replacement parts.

 Use of any other parts may create a 

hazard or cause product damage.

 

ONLY use cold water.

 

Make sure minimum clearance 

of 3 feet is maintained 

from combustible materials.

 

Never spray close to the surface

 to be cleaned as you 

can damage the surface.

 

After stopping the engine, always pull the trigger on 
the trigger handle to relieve stored pressure in the 
high pressure hose.

 Failure to do so could result in 

serious personal injury.

 

For outdoor use only.

 

Ensure the high pressure hose is properly connected 
before using the product.

 

Save these instructions.

 Refer to them frequently and 

use them to instruct other users. If you loan someone this 
tool, loan them these instructions also.

SPECIFIC SAFETY RULES

Summary of Contents for RY803023

























































Reviews: