background image

OPERA

OPERA

OPERA

OPERA

OPERATING INSTRUCTIONS

TING INSTRUCTIONS

TING INSTRUCTIONS

TING INSTRUCTIONS

TING INSTRUCTIONS

P/N 134753100A (0610)

Printed in U.S.A.

SOAK &

PREWASH

KNITS &

DELICATES

COLORS/

PERM PRESS

12

4

8

PERM PRESS

PREWASH

WHITES/

REGULAR

HAND WASH

12

8

15

WASH/RINSE TEMPERATURE

RESET

COLD

COLD

WARM

COLD

HOT

COLD

RINSE

SPIN

SOAK

PREWASH

RINSE

POWER SPIN

EXTRA RINSE

6

SUPER

NO

YES

EXTRA RINSE

MEDIUM

LOAD SIZE

SMALL

Before Operating Your Washer

Read your Washer Owner's Guide.   

It has important

safety and warranty information. It also has many
suggestions for best washing results.

  To reduce the risk of fire, electric shock,

or injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONS in your Washer Owner's Guide before
operating this appliance.

Operating Steps

Read Washing Procedures in your Owner's Guide.

It explains these operating steps in detail.

1. Sort laundry into loads that can be washed

together.

2. Prepare items for washing.

3. Pretreat stains and heavy soil.

4. Add the measured amount of detergent to

wash tub before adding the laundry load.

 5.  If desired, add liquid bleach to bleach dispenser.

DO NOT pour bleach directly onto the load.

6. If desired, add liquid fabric softener to fabric

softener dispenser .  DO NOT pour fabric softener
directly onto wash load.

7. Add laundry load loosely to wash tub.  Dry load

should not be higher than top of agitator
vanes.  For best results, DO NOT overload.

8. Select the wash cycle and settings according to

type, size and soil level of each load.

9. Close lid and pull out Cycle Selector knob to

start washer. 

The washer will fill with water but will

not agitate or spin with the lid open.

To stop the washer, push in the Cycle Selector knob.
To change a cycle, push in the Cycle Selector knob
and turn it clockwise to the desired setting.  Pull out
the knob to restart the washer.

10. Remove items at end of cycle. 

Wait about 2-3

minutes for safety lid lock to release.

Cycle Selection

Push in and turn the Cycle Selector knob
clockwise to the desired cycle.  For best results,
follow the washing instructions on the fabric
care labels.

The Whites, Colors and Knits & Delicates cycles
progress through wash agitation, drain and spin
with a spray rinse, rinse agitation, and a final spin.

Whites Cycle

This cycle provides up to 15 minutes of normal  agitation
and a fast spin for most fabrics.

Power Spin

 provides 12 minutes of spin for maximum

removal of water.  This conserves energy by  reducing
drying time.

Extra Rinse Cycle

Use the Extra Rinse cycle after any complete wash
cycle when an additional deep rinse may be needed
to remove excess detergent and soil.  It provides 3
minutes of rinse agitation in cold water, followed by a
spray rinse at the selected rinse water temperature
during spin.

If desired, add liquid fabric softener to this rinse
(not the fabric softener dispenser) or use a softener
sheet in the dryer.  DO NOT pour fabric softener
directly onto the load.

4

Summary of Contents for GLWS1439FS - WSHR 14CYC 3SPD Xtra Rinse F-G

Page 1: ...f agitator vanes For best results DO NOT overload 8 Select the wash cycle and settings according to type size and soil level of each load 9 Close lid and pull out Cycle Selector knob to start washer The washer will fill with water but will not agitate or spin with the lid open To stop the washer push in the Cycle Selector knob To change a cycle push in the Cycle Selector knob and turn it clockwise...

Page 2: ...esults DO NOT overload Add items loosely to the tub The dry load should not be higher than the top of the agitator vanes There should be enough water in the tub for items to move freely To increase the water level after the wash cycle begins turn the Load Size knob to Reset and hold When water begins to enter the tub turn the knob to the desired setting Extra Rinse To automatically add an Extra Ri...

Page 3: ...chaque charge 9 Fermez le couvercle et tirez sur le bouton de Sélection de cycle pour démarrer la machine à laver La machine à laver se remplit d eau mais l agitateur ne fonctionne pas et aucun essorage ne survient lorsque le couvercle est ouvert Pour arrêter la machine à laver poussez sur le bouton de Sélection de cycle Pour changer le cycle poussez sur le bouton de Sélection de cycle et tournez ...

Page 4: ...ide Ajoutez la charge Sélectionnez un rinçage à l eau froide et la taille de charge appropriée La charge sera agitée durant 4 minutes égouttée et essorée Cycle Tricot Délicats Ce cycle effectue un lavage doux par agitation durant 6 minutes suivi d un essorage lent pour des soins doux aux tricots et articles délicats Lavage délicat trois minutes d agitation du cycle de lavage délicat pour les artic...

Reviews: