7
SYMBOLS
Safety Alert Symbol
Indicates danger, warning or caution. It means attention!!!
Your safety is involved.
Read Your Operator's
Manual
Your manual contains special messages to bring attention
to potential safety concerns as well as operating and
servicing information. Please read all the information
carefully to ensure satisfaction and safe use.
uV radiation
Protect operator and passerby from the effect of uV
radiation. This can cause permanent damage to the eye.
Make sure the arc and resulting flash is shielded at all
times.
Wear approved face
mask
Always wear approved face mask with correct filter,
gloves and apron to protect against welding operation.
Recycle Symbol
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling
advice.
CE Marking
Conforms to relevant safety standards.
Wet conditions alert
Do not expose to wet or damp conditions.
uV
Keep bystanders away
Keep all bystanders and pets at least 15 m away.
TROUBLESHOOTING
Troubleshooting Guide
Problem
Possible Cause
Remedy
Irregular darkening or
The headband may have been
Readjust the distance of the shade
dimming.
unevenly set on the two sides of
cartridge.
the helmet (unequal distances from
the eyes to the shade cartridge).
Shade cartridge does
The sensors are soiled or
Clean.
not darken or flickers.
obstructed.
Front cover lens oiled or damaged. Clean or replace.
Welding current too low.
Adjust weld amps.
Poor vision.
Operative lenses and/or shade
Check, clean or replace.
cartridge soiled.
Insufficient background lighting.
Adjust light.
Summary of Contents for RWH-800A
Page 8: ......
