background image

TECHTRONIC INDUSTRIES (AUSTRALIA) PTY. LTD.

Level 1, 660 Doncaster Road,

Doncaster, Victoria 3108, 

Australia

Tel: 1300 361 505     Fax: 1800 807 993

TECHTRONIC INDUSTRIES N.Z. LIMITED

Auckland: 27 Clemow Drive, Mt Wellington, N.Z.

Tel: (09) 573 0230     Free Call: 0800 279 624     Fax: (09) 573 0231

Contact during normal business hours.

Subject to the guarantee condition below, this Ryobi 

tool (hereinafter called “the product”) is guaranteed by 

TECHTRONIC  INDUSTRIES  AUSTRALIA  PTY 

LIMITED (hereinafter called “the Company”) to be free 

from defects in material or workmanship for a period 

of  24  months  from  the  date  of  original  purchase 

covering  both  parts  and  labour.  Under  the  terms  of 

this guarantee, the repair or replacement of any part 

shall be the opinion of the Company or its authorised 

service  centre.  Should  service  become  necessary 

during the warranty period, the owner should contact 

the  customer  service  HELPLINE  1300  361  505  or 

contact  the  retailer  from  whom  the  product  was 

purchased.

In order to obtain guarantee service, the owner must 

present the sales docket and Guarantee Certificate to 

confirm date of purchase. This product is sold by the 

dealer or service centre as principal and the dealer 

has no authority from the Company’s behalf except as 

herein contained or herein referred to.
Guarantee Conditions

This guarantee only applies provided that the product 

has been used in accordance with the manufacturer’s 

recommendations under normal use and reasonable 

care  (in  the  opinion  of  the  Company)  and  such 

guarantee  does  not  cover  damage,  malfunction  or 

failure resulting from misuse, neglect, abuse, or used 

for a purpose for which it was not designed or is not 

suited  and  no  repairs,  alterations  or  modifications 

have  been  attempted  by  other  than  an  authorised 

service centre. This guarantee will not apply if the tool 

is damaged by accident or if repairs arise from normal 

wear and tear. The Company accepts no additional 

liability  pursuant  to  this  guarantee  for  the  costs  of 

travelling or transportation of the product or parts to 

and from the service dealer or service centre - such 

costs are not included in this guarantee.

Certain legislation, including the Trade Practices Act, 

1974 (as amended) and other state and territorial laws 

give  rights  to  the  buyer  and  impose  liability  on  the 

seller in certain circumstances. Nothing herein shall 

have the effect of excluding, restricting or modifying 

any condition, guarantee, right or liability imposed, to 

the  extent  only  that  such  exclusion,  restriction  or 

modification would render any term herein void.

Summary of Contents for RSH2400RG











Reviews: