background image

4

English (Original Instructions)

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOLS

SIGNAL

MEANING

DANGER:

Indicates an imminently hazardous situation, which, if not avoided, will result in death 

or serious injury.

WARNING:

Indicates a potentially hazardous situation, which, if not avoided, could result in 

death or serious injury.

CAUTION:

Indicates a potentially hazardous situation, which, if not avoided, may result in minor 

or moderate injury.

CAUTION:

(Without Safety Alert Symbol) Indicates a situation that may result in property 

damage.

SERVICE

Servicing requires extreme care and knowledge 

and should be performed only by a qualified service 

technician. For service we suggest you return the 

product to your nearest 

AUTHORIZED SERVICE 

CENTRE

 for repair. When servic ing, use only identical 

replacement parts.

WARNING:

To avoid serious personal injury, do not attempt 

to use this product until you read thoroughly and 

understand completely the operator’s manual. 

If you do not under stand the warnings and 

instructions in the operator’s manual, do not use 

this product. 

SAVE THESE INSTRUCTIONS

FEATURES

PRODUCT SPECIFICATIONS

Engine .......................................................... 163 cc OHV

 

Fuel Tank Capacity .............................................1.1 liters

Oil (Sump) Capacity ..............................................600 ml

Pressure .............................................................. 172 bar

Water Flow ............................................................520 l/h 

Maximum Inlet Water Temperature...........................

40˚C

Maximum Inlet Water Pressure ............................... 7 bar

DESCRIPTION

Fig 1

1. Fuel tank

2. Oil cap

3. High Pressure hose

4. Nozzles and nozzle storage

5. Fuel cap

6. Handle

7. Spray wand

8. Trigger with lock out

9. Recoil starter

10. ON/OFF switch

11. Injection hose

Fig 2

12. Hitch pin

13. Washer

14. Wheel

15. Axle

Fig 3

16. Cam handle

Fig 4

17. Oil cap/dipstick

Fig 5

18. Funnel

19. Fuel cap

Fig 6

20. Injection hose

21. Injection hose filter

22. Injection hose fitting

Fig 7

23. Connector

24. Trigger handle

25. Spray wand

Fig 8

26. High pressure hose

27. Collar

28. Inlet coupler

Fig 9

29. Collar

30. Threaded nipple

Fig 10

31. Screen

32. Garden hose

33. Water intake

Summary of Contents for RPW2400B












Reviews: