background image

3

English (Original Instructions)

SYMBOLS

Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta-

tion of these symbols will allow you to operate the tool better and safer.

SYMBOLS

NAME

DESIGNATION/EXPLANATION

Safety Alert

Precautions that involve your safety.

Read The Operator’s 

Manual

To reduce the risk of injury, user must read and understand opera tor’s 

manual before using this product.

Eyes and Hearing 

protection

Wear eyes and hearing protection when operating this equipment.

Hot Surface

To reduce the risk of injury or damage, avoid contact with any hot 

surface.

Risk of Injections

To reduce the risk of injection or severe injury, do not direct spray at 

persons or animals.

Risk of Explosion

Fuel and its vapors are explosive and can cause severe burns  or 

death.

Risk of Fire

Fuel and its vapors are extremely flammable and explosive. Fire can 

cause severe burns or death.

Toxic Fumes

Petrol products emit carbon monoxide, an odourless, colourless, 

poison gas. Breathing carbon monoxide can cause nausea, fainting, 

or death.

Kickback

To reduce the risk of injury from kickback, hold the spray wand securely 

with both hands when the machine is on.

Electric Shock

Failure to use in dry conditions and to observe safe practices can 

result in electric shock.

Petrol and Oil

Use unleaded petrol intended for motor vehicle use with an octane 

rating of 91 [(R + M)/2)] or higher. This product is powered  by 

4-stroke engine. (Recommended 4-stroke engine oil: 10W30).

Warning symbol

Must not be directed at persons, live electrical equipment

Do not connect to 

drinking water supply 

without backflow 

preventer

Appliance not suitable for connection to the drinking water mains 

without backflow preventer.

Summary of Contents for RPW2400B












Reviews: