background image

2

English (Original Instructions)

contact local fire agencies for laws or regulations 

relating to fire prevention requirements.

WARNING: 

Do not use the appliance within the range of 

persons unless they wear protective clothing.

WARNING: 

Do not direct the jet against yourself or others in 

order to clean clothes or footwear.

WARNING: 

Do not use combustion engine powered 

appliances indoors unless adequate ventilation is 

assessed by national labour authorities.

WARNING: 

Ensure that any exhaust emissions are not in 

the vicinity of air intakes. Water that has flown 

through backflow preventers is considered to be 

non-potable.

SPECIFIC SAFETY RULES

NEVER DIRECT A WATER STREAM TOWARDS 

PEOPLE OR PETS, OR ANY ELECTRICAL 

DEVICE.

Before starting any cleaning operation , 

close 

doors and windows. Clear the area to be cleaned

 

of 

debris, toys, outdoor furniture, or other objects that

 

could create a hazard.

n  

Never pick up or carry a machine while the 

engine is runing.

n  

NEVER START THE MACHINE 

if ice has formed in 

any part of the equipment.

DO NOT USE ACIDS, ALKALINES, SOLVENTS, 

FLAMMABLE MATERIAL, OR INDUSTRIAL 

GRADE SOLUTIONS 

in this product. These 

products can

 

cause physical injuries to the operator 

and irreversible damage to the machine.

n  

ALWAYS OPERATE THE MACHINE 

on a level 

surface. If the engine is at an incline, it could seize 

due to improper lubrication (even at the maximum 

oil level).

n  

WARNING: HIGH PRESSURE JETS CAN BE 

DANGEROUS IF SUBJECT TO MISUSE. 

The jet 

must

 

not be directed at persons, animals, electrical 

devices,

 

or the machine itself.

n  

Never atempt to make any adjustments while the 

engine (motor) is runing 

(except

 

where specifically 

recommended by the manufacturer).

PROTECTIVE COVERS MUST ALWAYS COVER 

ROTATING PARTS WHEN THE ENGINE IS 

RUNNING.

KEEP COOLING AIR INTAKE 

(recoil starter area) 

and muffler side of the engine at least 1m away 

from buildings, obstructions, and other burnable 

objects.

KEEP THE ENGINE AWAY FROM FLAMMABLES 

AND OTHER HAZARDOUS MATERIALS.

KEEP AWAY FROM HOT PARTS. 

The muffler and 

other engine parts become very hot, use caution.

n  

DO NOT TOUCH THE SPARK PLUG AND 

IGNITION CABLE 

when starting and operating the 

engine.

CHECK FUEL HOSES AND JOINTS 

for looseness 

and fuel leakage before each use.

CHECK BOLTS AND NUTS 

for looseness before 

each use. A loose bolt or nut may cause serious 

engine problems.

n  

HIGH PRESSURE CLEANER SHALL NOT 

BE USED BY CHILDREN OR UNTRAINED 

PERSONNEL.

n  

USE HEAR PROTECTION DEVICE.

n  

Use only hoses, fittings and couplings 

recommended by the manufacturer.

n  

Always refuel outdoors . 

Never refuel indoors or in 

a poorly ventilated area.

n  

Never store the machine with fuel in the fuel 

tank inside a building 

where ignition sources

 

are 

present, such as hot water and space heaters, 

clothes dryers, and the like.

n  

If the fuel tank has to be drained, do this 

outdors.

n  

To reduce the risk of fire and burn injury, 

handle 

fuel with care. It is highly flammable.

n  

Do not smoke while handling fuel.

n  

Add fuel before starting the engine. 

Never 

remove the cap of the fuel tank or add fuel while the 

engine is running or when the engine is hot.

n  

Loosen fuel cap slowly 

to release pressure and to 

keep fuel from escaping around the cap.

n  

Replace all fuel tank and container caps 

securely.

n  

Wipe spilled fuel from the unit. 

Move 9m away 

from refueling site before starting engine.

If fuel is spilled, 

do not attempt to start the engine 

but move the machine away from the area of 

spillage and avoid creating any source of ignition 

until fuel vapors have dissipated.

n  

Never attempt to burn off spilled fuel under any 

circumstances.

n  

Before storing, allow the engine to cool.

n  

Store fuel in a cool, well-ventilated  area, 

safely 

away from spark and/or flame-producing equipment.

Store fuel in containers 

specifically designed for 

this purpose.

n  

Empty fuel tank and restrain the unit from 

moving 

before transporting in a vehicle.

n  

WHEN SERVICING USE ONLY IDENTICAL Ryobi 

REPLACEMENT PARTS. 

Use of any other parts 

may create a hazard or cause product damage.

n  

Use cold water only.

n  

Make sure minimum clearance 

of 1m is 

maintained from combustible materials.

n  

SAVE THESE INSTRUCTIONS. 

Refer to them 

frequently and use them to instruct other users. 

If you loan someone this tool, loan them these 

instructions also.

WARNING:

The product is not intended for use by persons 

(including children) with reduced physical,sensory 

or mental capabilities, or lack of experience 

and knowledge, unless they have been given 

supervision or instruction concerning use of the 

product by a person responsible for their safety.

Children should be supervised to ensure that they 

do not play with the product.

Summary of Contents for RPW2400B












Reviews: