background image

5

ENGLISH(Original Instructions)

DESCRIPTION 

Figure 2

1.

 

On/Off switch

2.

 

Gun storage

3.

 

Gun/Lance

4.

 

Detergent tank

5.

 

Lance storage

6. Trigger 

lock-out

7. Trigger
8. Hose
9. Telescopic 

handle

10.  Power cord storage

Figure 3

11. Hitch pin
12. Wheel
13. Axle

Figure 4

14. Handle assembly
15. Button
16. Collar

Figure 5

17. Lance connection
18. Locking collar
19. Adapter

Figure 6

20.  High pressure hose

Figure 7

21.  Water intake coupler
22. Pump outlet coupler

Figure 11

23. Spray nozzle

Figure 13

24.  Handle release button

KNOW YOUR PRESSURE WASHER

See Figure 2.

The safe use of this product requires an understanding 
of the information on the product and in this operator’s 
manual as well as a knowledge of the task you are 
attempting.
Before using this product, familiarize yourself with all 
operating features and safety rules.

DETERGENT TANK

Remove the cap from the detergent tank to add detergent 
to the pressure washer.

TRIGGER

Depressing this trigger allows you to dispense water at 
high pressure.

TRIGGER LOCK-OUT

The trigger lock-out prevents accidental use of the trigger.

ON/OFF SWITCH

This switch turns the pressure washer on and off.

PRODUCT SPECIFICATIONS

PRODUCT SPECIFICATIONS

Description

Unit

RPW120X(RATED DESC.)

Rated voltage

V~/Hz

220-240/50

Rated Pressure (P)

Bar (Mpa)

100(10)

Allowable Pressure (Pmax)

Bar (Mpa)

140(14)

Power Rating

W

1800

Rated water flow (Q)

L/min

6.67

Maximum Water Inlet pressure (Pin max)

Bar (Mpa)

7(0.7)

Maximum Water Temperature

°C

40

Protection Degree

IEC 529

IP25

L

WA 

(sound power level)

dB(A)

88.6; K=3dB(A)

L

PA 

(sound pressure level) 

dB(A)

75.8; K=3dB(A)

Vibration

m/s

2

0.851; K=1.5m/s

2

RPW120X manual.indd   Sec2:5

RPW120X manual.indd   Sec2:5

09-12-15    9:22

09-12-15    9:22

Summary of Contents for RPW120X















Reviews: