background image

2

ENGLISH(Original Instructions)

WARNING: 

To reduce the risk of electrocution, keep all 
connections dry and off the ground. Do not touch 
plug with wet hands.

■ 

To reduce the risk of injury, 

High pressure cleaners 

shall not be used by children or untrained personnel. 

keep children and visitors away. All visitors should 
wear safety glasses and be kept a safe distance from 
work area.

■ 

Use correct product. Don’t force product or 
attachment to do a job it was not designed for. Don’t 
use it for a purpose not intended.

■ 

Use only recommended accessories. The use of 
improper accessories may cause risk of injury.

■ 

Never leave product running unattended. Turn power 
off. Don’t leave product until it comes to a complete 
stop.

■ 

Keep the motor free of grass, leaves, or grease 

to 

reduce the chance of a fire hazard.

■ 

Keep product dry, clean, and free from oil and 
grease. Always use a clean cloth when cleaning. 
Never use brake fluids, gasoline, petroleum-based 
products, or any solvents to clean product.

■ 

Check the work area before each use. Remove all 
objects such as rocks, broken glass, nails, wire, or 
string which can be thrown or become entangled in 
the machine.

■ 

Do not use product if switch does not turn it off. Have 
defective switches replaced by an authorized service 
centre.

■ 

Avoid dangerous environments. Don’t expose to rain. 
Keep work area well lit.

■ 

Do not abuse the cord. Never use the cord to carry 
the product or to disconnect the plug from an outlet. 
Keep cord away from heat, oil, sharp edges, or 
moving parts. Replace damaged cords immediately. 
Damaged cords increase the risk of electric shock.

■ 

Inspect extension cords periodically and replace 
if damaged. 

Keep handles dry, clean, and free from 

oil or grease.

■ 

Before starting any cleaning operation, 

close 

doors and windows. Clear the area to be cleaned of 
debris, toys, outdoor furniture, or other objects that 
could create a hazard.

■ 

Do not use acids, alkalines, solvents, flammable 
material, bleaches, or industrial grade solutions in 
this product. These products can cause physical 
injuries to the operator and irreversible damage to the 
machine.

■ 

Keep the motor away from flammables and other 
hazardous materials.

■ 

Check bolts and nuts for looseness before each 
use. A loose bolt or nut may cause serious motor 
problems.

■ 

Before storing, 

allow the motor to cool.

■ 

When servicing use only identical replacement parts. 
Use of any other parts may create a hazard or cause 
product damage.

■ 

ONLY 

use cold water.

■ 

Make sure minimum clearance of 1 metre is 
maintained from combustible materials.

■ 

Connect pressure washer only to an individual 
branch circuit.

■ 

Hold the gun and lance securely with both hands. 

Expect the gun to move when the trigger is pulled 
due to reaction forces. Failure to do so could cause 
loss of control and injury to yourself and others.

■ 

Save these instructions. Refer to them frequently and 
use them to instruct other users. If you lend someone 
this product, lend them these instructions also.

WARNING

High pressure hoses, fittings and couplings are 
important for the safety of the appliance. Use only 
hoses, fittings and couplings recommended by 
the manufacturer.

RPW120X manual.indd   Sec2:2

RPW120X manual.indd   Sec2:2

09-12-15    9:22

09-12-15    9:22

Summary of Contents for RPW120X















Reviews: