6
English(Original instructions)
To start a warm engine:
1.
Set the On/Off switch to the ON position ,
2.
Press the primer bulb 10 times or until the fuel fills
the bulb,
3. Set the choke lever to RUN position ,
4. Pull the starter grip sharply until the engine starts
NOTE:
4 times Maximum with no throttle.
DESCRIPTION
(Refer to figure sheet)
1. Pro cut string head
2. String head/shaft/grass deflector assembly
3. Silencer
4. Starter grip and rope
5. Choke lever
6.
On/Off switch
7. Throttle trigger
8. Handlebar
9. Line carrier
10. Primer bulb
11. Air filter cover
12.
Fuel cap
13. Grass deflector
14. Mow ball
15. Button
16. Guide recess
17. Knob
18. Lower handlebar
19. Upper handlebar
20.
Frame opening
21.
Bolt
22.
Throttle cable
23.
Holes
24.
Clip
25.
Bolt
26.
String line
27.
Line exit holes
28.
Line load holes
29.
Top cap
30. Open area
31. Full choke position
32.
Run position
33. Air intake area
34. Foam air filter
35. Air filter base
36. Air filter element
37. Spark plug
38. Spark plug cover
SPECIFICATIONS
Weight:
-Without fuel
9.7 kg
Volume (fuel tank)
620 cm
3
Cutting capacity
406 mm
String Diameter
2.7 mm
Engine Displacement
25.4 cm
3
Maximum engine power (in
accordance with ISO 8893)
0.9 HP (≈ 0.67 kW)
Maximum rational frequency of the
spindle
12000 min
-1
Engine idling speed range
3,200 - 4,000 min
-1
Operating speed of cutting means
8,500 - 10,000 min-1
Fuel Consumption (in accordance
with ISO 8893) at Max Engine
Performance
0.54 kg/h
Specific Fuel Consumption (in
accordance with ISO 8893) at Max
Engine Performance
0.6 L/kW.h
Vibration level (in accordance with EN 14910 Annex A)
Left handle
15.7 m/s2
Right handle
15.5 m/s2
Uncertainty of measurement
1.5 m/s2
Noise emission level (in accordance with EN 14910 Annex B)
A-weighted sound pressure level at
the operator’s position
95.2 dB (A)
Uncertainty of measurement
2.5 dB
A-weighted sound power level
108.4 dB (A)
Uncertainty of measurement
2.5 dB
FEATURES
KNOW YOUR WHEELED TRIMMER
See figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
CURVED SHAFT
The curved design of the trimmer shaft allows you to trim
perimeter areas easily.
