background image

9 — English

This product is designed for cutting and pruning 
small limbs and branches with a diameter of 
up to 1.25 inches 32 mm (softwood) and 1 
inches 28 mm (hardwood). MOVE TO PREP 
for CUTTING?

MAINTENANCE

 WARNING:

To avoid serious personal injury, always remove the bat-
tery pack from the tool when cleaning or performing any 
maintenance.

 WARNING:

Always wear eye protection with side shields marked 
to comply with ANSI Z87.1, along with head protection. 
Failure to do so could result in objects being thrown into 
your eyes resulting in possible serious injury.

 WARNING:

When servicing, use only recommended or equivalent 
replacement parts. Use of any other parts may create a 
hazard or cause product damage.

NOTICE

:

Periodically inspect the entire product for damaged, 
missing, or loose parts such as screws, nuts, bolts, caps, 
etc. Tighten securely all fasteners and caps and do not 
operate this product until all missing or damaged parts 
are replaced. Please contact customer service or an 
authorized service center for assistance.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most 
plastics are susceptible to damage from various types of 
commercial solvents and may be damaged by their use. Use 
clean cloths to remove dirt, dust, oil, grease, etc.

 WARNING:

Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact 
with plastic parts. Chemicals can damage, weaken or 
destroy plastic which may result in serious personal injury.

REPLACING OR SHARPENING THE BLADE

See Figures 6-9

 WARNING:

Always protect hands by wearing heavy gloves and/or 
wrapping the cutting edges of the blade with rags and 
other material when performing blade maintenance. Con-
tact with the blade could result in serious personal injury.

NOTE: 

Before removing the blade for sharpening or 

replacement, ensure that you have a T10 Torx screwdriver, 
a #4 hex key, and a 13mm socket wrench.

  Remove the battery pack.

  Place the product on a level surface with the housing side 

facing up. 

  Turn the screws counterclockwise to unlock. 

  Remove the housing.

  Flip the product onto its other side.

  Turn the locking screw counterclockwise to remove. 

  Remove the washer and the small gear. 

  Turn the locking nut counterclockwise to remove.

  Flip  the  product over onto its other side.

  Remove the swing gear assembly and cutting blade. Set 

aside. 

  

 

To sharpen the blades, rub a 300-400 grit sharpening 

stone across the edges of the cutting blade and the fixed 
blade.

  

 

To replace a dull cutting blade, discard the old blade 

and install a new blade.

  Place the new or sharpened blade on the tool.

  Insert the bolt on the swing gear through the large holes 

in the fixed blade and cutting blade.  .

 

NOTE: Use the alignment pin on the swing gear 
assembly to correctly position the blade.

  Reinstall the locking nut, washer, and screw on the other 

side.

  Reinstall the blade cover and the screws. Rotate the 

screws clockwise to secure the housing.

CLEANING THE PRUNING SHEAR

  Remove the battery pack.

  Clean the body and handles of the product with a soft, 

dry cloth after each use. Do not use water and soap to 
clean the product.

Summary of Contents for P2504



































Reviews: