Ryobi OLM1841H, Original Instructions Manual

Page: 8 / 240

Ŷ
Keep your body warm in cold weather.
When operating the product, wear gloves
to keep the hands and wrists warm. It is
reported that cold weather is a major factor
contributing to Raynaud’s Syndrome.
Ŷ
After each period of operation, exercise to
increase blood circulation.
Ŷ
Take frequent work breaks. Limit the
amount of exposure per day.
If you experience any of the symptoms of this
condition, immediately discontinue use and
see your physician.
WARNING
Injuries may be caused, or aggravated, by
prolonged use of a tool. When using any
tool for prolonged periods, ensure you take
regular breaks.
KNOW YOUR PRODUCT
See page 195.
Parts
1. On-off button
2. Start button
3. Motor control cable
4. Telescopic handle
5. Grass catcher full indicator
6. Height adjustment lever
7. Battery door
8. Handle lock
9. Grass catcher
10. Quick release fastener
11. Rear wheel
12. Front wheel
13. Isolator key
14. Mulching plug
15. Battery
16. Charger
SYMBOLS ON THE PRODUCT
Read and understand all
instructions before operating
the product, follow all warnings
and safety instructions.
Wear ear protection.
Wear eye protection.
Do not operate on inclines
greater than 15°. Mow across
the face of slopes, never up
and down.
Do not expose to rain or damp
condition.
Beware of sharp blades.
Blades continue to rotate after
the motor is switched off –
Remove isolator key before
maintenance
Beware of thrown or À ying
objects. Keep all bystanders,
especially children and pets,
at least 15 m away from the
operating area.
Press the Start button and then
the On-off button (A or B) to
start the product. Release the
Start button and keep pressing
the On-off button to run the
product. Release the On-off
button to stop the product.
Go
Stop
LED Indicators
The product is equipped with
two LEDs that indicate the
battery pack charge status. The
top LED indicator displays the
charge status of the battery
pack on the top port. The
bottom LED indicator displays
the charge status of the battery
pack on the bottom port.
Press the “?” button to check
the battery pack charge status.
Ŷ
LED indicator “On” indicates
that the battery pack is fully
charged.
Ŷ
LED indicator “Flashing”
indicates that the battery
pack has been fully
discharged and needs to be
charged.
6 | English