OPERATOR’S MANUAL
USB LITHIUM BATTERY PACK
FVB01
To register your RYOBI
™
product,
please visit: http://register.ryobitools.com
Use this USB lithium battery pack for Ryobi USB lithium
cordless products only. Refer to the Operator’s Manual pro-
vided with the product. Always mention the model number
above when communicating with us regarding this battery
pack.
SAFETY RULES
work best at normal room temperature.
To reduce the
risk of serious personal injury, do not store outside or in
vehicles.
Under extreme usage or temperature conditions, battery
leakage may occur. If liquid comes in contact with your
skin, wash immediately with soap and water. If liquid
gets into your eyes, flush them with clean water for at
least 10 minutes, then seek immediate medical attention.
Following this rule will reduce the risk of serious personal
injury.
When battery pack is not in use, keep it away from
other metal objects like: paper clips, coins, keys, nails,
screws or other small metal objects that can make a
connection from one terminal to another.
Shorting the
battery terminals together may cause sparks, burns or a fire.
Always remove battery pack from your tool when you
are assembling parts, making adjustments, cleaning
or when not in use.
Removing battery pack will prevent
accidental starting that could cause serious personal injury.
If a battery powered tool stops during use, refer to the
tool operator’s manual for troubleshooting instructions.
Charge battery pack as needed.
Always remove battery pack before storing the device.
Always wear eye protection with side shields marked
to comply with ANSI Z87.1.
Failure to do so could result
in objects being thrown into your eyes and other possible
serious injuries.
Keep battery pack dry, clean, and free from oil and
grease. Always use a clean cloth when cleaning.
Never
use brake fluids, gasoline, petroleum-based products or
any solvents to clean battery pack.
Do not use a battery pack that is damaged or modified.
Damaged or modified batteries may exhibit unpredictable
behavior resulting in fire, explosion or risk of injury.
Do not disassemble, modify or attempt to repair a
battery pack that has been damaged.
Do not expose a battery pack or appliance to fire or
excessive temperature.
Exposure to fire or temperature
above 265° F (130° C) may cause explosion.
Have servicing performed by a qualified repair person
using only identical replacement parts.
This will ensure
that the safety of the product is maintained.
Do not charge close to combustibles.
Save these instructions.
Refer to them frequently and use
them to instruct others who may use this tool. If you loan
someone this tool, loan them these instructions also.
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure
to follow all instructions listed below, may result in electric
shock, fire and/or serious personal injury.
Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in operating
condition. Be aware of possible hazards when not using your
battery tool or when changing accessories.
Following
this rule will reduce the risk of electric shock, fire or serious
personal injury.
Do not place battery tools or their batteries near fire
or heat.
This will reduce the risk of explosion and possibly
injury.
Do not crush, drop or damage battery pack. Do not
use a battery pack or charger that has been dropped
or received a sharp blow.
A damaged battery is subject
to explosion. Properly dispose of a dropped or damaged
battery immediately.
Batteries can explode in the presence of a source
of ignition, such as a pilot light.
To reduce the risk of
serious personal injury, never use any cordless product in the
presence of open flame. An exploded battery can propel
debris and chemicals. If exposed, flush with water
immediately.
Do not charge battery tool in a damp or wet location.
Following this rule will reduce the risk of electric shock.
Use only UL listed USB sources to charge this device.
Use of any non-UL Listed USB sources may create a risk
of fire.
Do not charge in an area of extreme heat or cold. It will
COLD WEATHER OPERATION
The USB lithium battery pack can be used in tools at
temperatures down to 14° F. Put the battery pack on a tool and
use the tool in a light duty application. After about a minute, the
pack will warm up and begin operating normally.
OPERATION
1 - English
