![background image](http://html1.mh-extra.com/html/ryobi/ess200rs/ess200rs_user-manual_1506236005.webp)
1
English
GB
FR
DE
ES
IT
NL
PT
DK
SE
FI
NO
RU
PL
CZ
HU
RO
LV
LT
EE
HR
SI
SK
GR
TR
DESCRIPTION
1. Switch
trigger
2. Variable speed control selector
3. Overmold
handle
4. Dust collection box
5. Sanding
pad
6. Paper
clamp
7. Live tool indicator
8. Hook and loop sandpaper
9. Non-adhesive
sandpaper
SPECIFIC SAFETY INSTRUCTIONS FOR
SANDERS
¿
Always wear safety goggles and a dust mask when
sanding, especially sanding over-head.
¿
The machine is not suitable for wet sanding.
¿
Do not use sanding paper larger than needed.
Extra paper extending beyond the sanding pad can
also cause serious lacerations.
¿
The dust collection box shall be equipped with the
tool.
It should be emptied frequently. To connect dust
collection box, insert the adapter of dust box to the
dust-collection opening on the rear end of the sander.
WARNING
Do not throw sanding dust on an open À re because
materials in À ne particle form may be explosive.
WARNING
A suitable breathing respirator must be worn while
sanding lead paint, some woods and metal to avoid
breathing the harmful/toxic dust or air.
SPECIFICATIONS
Model
ESS200RS
ESS280RV
Power
200 W
280 W
Voltage
230 V - 240 V
50 Hz
230 V - 240 V
50 Hz
No-load speed
12000 min
-1
7000-12000
min
-1
Orbital diameter
2.0 mm
2.0 mm
Weight
1.5 kg
1.7 kg
FEATURES
See Figure 1.
Your sander is suitable for sanding with coarse, medium
and À ne grit sandpaper. It will produce a À ne, scratch free
À nish when used to sand with the grain on wood surfaces.
It has been designed so that Å ush corner sanding on three
sides of the sander is possible.
Your sander has a comfortable palm grip handle that
provides maximum one-hand comfort and reduces
operator fatigue during continuous sanding operations.
Before using this product, familiarize yourself with all
operating features and safety requirements. However, do
not let familiarity with the tool make you careless.
SWITCH
Electronic speed control
The electronic speed control allows the operator to adjust
speed to meet a variety of sanding material from tough
heavy grained timber to delicate veneer.
This tool is equipped with a simple switch control.
È
Turn on the sander: Slide the switch to “|”.
È
Turn off the sander: Slide the switch to “O”.
WARNING
Do not allow familiarity with tools to make you careless.
Remember, a careless fraction of a second is sufÀ cient to
inÅ ict severe injury.
DUST COLLECTION BOX
The dust collection box attaches to the sander and keeps
dust to a minimum.
VARIABLE SPEED (MODEL - ESS280RV)
Your sander has advanced electronic features, designed
to assist you in getting the maximum use from your
sander. By making proper speed selections, your tool can
be adjusted to speciÀ c sanding needs.
The electronic feature of your tool introduces the Å exibility
of adjusting the motor speed to required job conditions. An
electronic speed control module senses the load applied
to the motor and increases or decreases motor voltage to
compensate for and maintain desired RPM. Speed can be
set according to the sanding purpose or the surface of the
workpiece you will be using.
Select clockwise to increase speed for rough surfaces or
for quick removal of stock and anti-clockwise to decrease
speed for the smaller, delicate sanding applications.