![background image](http://html1.mh-extra.com/html/ryobi/eag-1111/eag-1111_user-manual_1504818007.webp)
THANK YOU FOR BUYING A RYOBI PRODUCT.
To ensure your safety and satisfaction, carefully read
through this OWNER’S MANUAL and the SAFETY
INSTRUCTIONS before using the product.
INSTRUCTIONS FOR SAFE HANDLING
■
Make sure that the tool is only connected to the
voltage marked on the name plate.
■
Never use the tool if its cover or any bolts are missing.
If the cover or bolts have been removed, replace them
prior to use. Maintain all parts in good working order.
■
Always secure tools when working in elevated positions.
■
Never touch the blade, grinding wheel or other
moving parts during use.
■
Never start a tool when its rotating component is in
contact with the work piece.
■
Never lay a tool down before its moving parts have
come to a complete stop.
■
ACCESSORIES:
The use of accessories or
attachments other than those recommended in this
manual might present a hazard.
■
REPLACEMENT PARTS:
When servicing use only
identical replacement parts.
ANGLE GRINDER SAFETY PRECAUTIONS
■
Check that the speed marked on the grinding wheel is
equal to or greater than the rated speed of the tool.
■
Ensure that the dimensions of the grinding wheel are
compatible with the tool and that the wheel fits
the spindle.
■
Grinding wheels must be stored in a dry place.
■
Grinding wheels must not be used for any operation
other than grinding.
■
Grinding wheels must be stored and handled with care
in accordance with the manufacturer’s instruction.
■
Inspect the grinding wheel before use to ensure that it is
not chipped or cracked. Chips or cracks can cause the
wheels to shatter, resulting in possible serious injury.
■
Ensure that the wheel is fitted in accordance with
this manual.
■
Ensure that the grinding wheel is correctly mounted
and tightened before use and run the tool at no-load
speed for 30 seconds in a safe position. Stop
immediately if there is considerable vibration or if
other defects are detected. If this condition occurs,
check the tool to determine the cause.
■
Do not use separate reducing bushings or adapters to
adapt large hole grinding wheels.
■
Check that the work piece is properly supported.
■
Use only grinding wheels approved by authorized
service centre
■
Ensure that sparks resulting from use do not create a
hazard e.g. do not hit people, or ignite flammable
substances.
■
Always use protective safety glasses and ear
protectors.
■
Use other personal protective equipment such as
gloves, apron and helmet when necessary.
■
Never place the tool on the floor or other surfaces
while it is running.
■
Grinding wheels continue to rotate after the tool is
switched off.
■
Never touch the wheel or place it on the floor or other
surfaces while it is rotating.
■
The flange and clamp nut must have same outer
diameter.
■
Do not remove the soft paper in the center of the
grinding wheel. (If the paper has been previously
removed, insert some soft paper or rubber between
grinding wheel and flange.)
■
Use the tool only for approved applications. Never
use coolants or water or use the tool as a fixed tool.
■
Grip the tool securely with both hands while operating.
SPECIFICATIONS
EAG-7511/
EAG-7512/
EAG-1111
EAG-1112
Grinding wheel
115 mm (4-1/2”)
125 mm (5")
Voltage*
230 V ~ 50 Hz
230 V ~ 50 Hz
Input
750 / 1150 W
750 / 1150 W
Spindle thread
M14
M14
No load speed
11,000 min.
-1
/
11,000 min.
-1
/
10,000 min.
-1
10,000 min.
-1
Overall length
310 mm
310 mm
Net weight
2.35 kg
2.35 kg
* Be sure to check the nameplate on the product,
because the voltage is subject to change depending
on the area in which the product is to be used.
Maximum circumferential speed of grinding wheel:
4,800 m/min.
Example of calculation:
4,320 = 3.14 x 125 x 11,000 / 1,000
4,320: Circumferential speed of grinding wheel
125: Wheel diameter
11,000: No load speed of grinder
4
GB
English
F
D
E
I
P
NL
S
DK
N
FIN
GR
H
CZ
RUS
PL
RO
SLO
TR
HR
EAG-7511_20 lgs.qxd 2003/2/9 8:32 PM Page 4