background image

LIMITED WARRANTY

TTI warrants this outdoor product to be free of defects in material and workmanship for 24 months from the date of purchase by 

the original purchaser, subject to the limitations below.  Please keep your invoice as proof of date of purchase.

This warranty is only applicable where the product is used for personal and non-commercial purposes.

 This warranty 

does not cover damage or liability caused by / due to misuse, abuse, accidental or intentional acts by user, improper handling, 

unreasonable use, negligence, failure by end user to follow operating procedures outlined in the user’s manual, attempted repair 

by non-qualified professional, unauthorized repair, modification, or use of accessories and/or attachments not specifically rec-

ommended by authorized party.  Please see your local dealer for list of authorized service centers in your area.

This warranty does not cover belts, brushes, bags, bulbs or any part which ordinary wear and tear results in required replace-

ment during warranty period. This warranty does not cover transportation cost or consumable items such as fuses and batteries.

This limited warranty is void if the product’s original identification (trade mark, serial number, etc.) markings have been defaced, 

altered or removed or if product is not purchased from an authorized reseller or if product is sold AS IS and / or WITH ALL 

FAULTS.

Where permitted, the provisions of this limited warranty are in lieu of any other written warranty, whether express or implied, 

written or oral, including any warranty of MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT 

SHALL  WE  BE  LIABLE  FOR  SPECIAL,  INCIDENTAL,  CONSEQUENTIAL  OR  INCIDENTAL  DAMAGES.  OUR  MAXIMUM 

LIABILITY SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID BY YOU FOR THE PRODUCT.  

This warranty is valid only in the European Union, Australia and New Zealand. Outside these areas, please contact your author-

ized Ryobi dealer to determine if another warranty applies.

Summary of Contents for Dual Clean RPW105DM














Reviews: