background image

3

ENGLISH(Original Instructions)

SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper 
interpretation of these symbols will allow you to operate the product better and safer.

SYMBOL

NAME

DESIGNATION/EXPLANATION

 

Safety Alert

Indicates a potential personal injury hazard.

V

Volts

Voltage

A

Amperes

Current

Hz

Hertz

Frequency (cycles per second)

W

Watt

Power

min

Minutes

Time

 

~

Alternating Current

Type of current

no

No Load Speed

Rotational speed, at no load

          

Class II Construction

Double-insulated construction

.../min

Per Minute

Revolutions, strokes, surface speed, orbits etc., per minute

       

Wet Conditions Alert

Do not expose to rain or use in damp locations.

      

Read  The  Operator’s 
Manual

To  reduce  the  risk  of  injury,  user  must  read  and  understand  operator’s 
manual before using this product.

     

Eye Protection

Always  wear  safety  goggles  or  safety  glasses  with  side  shields  and,  as 
necessary, a full face shield when operating this product.

     

Risk of Injection

To reduce the risk of injection or injury, never direct a water stream towards 
people or pets or place any body part in the stream. Leak ing hoses and fittings 
are also capable of causing injection injury. Do not hold hoses or fittings.

      

Kickback

To reduce the risk of injury from kickback, hold the spray lance securely 
with both hands when the machine is on.

    

Electric Shock

Failure to use in dry conditions and to observe safe practices can result 
in electric shock.

Risk of Explosion

Fuel and its vapours are explosive and can cause severe burns or death.

Risk of injury

Warning!  Never  point  the  gun  to  human,  animals,  the  machine  body, 
power supply or any electric appliances

Risk of Injections

To reduce the risk of injection or severe injury, keep hands and feet away 
from the cleaning deck while the pressure washer is running.

25 Degree Nozzle

25 Degree Nozzle for general purpose cleaning.

Low Pressure Nozzle

Low Pressure nozzle for rinsing or applying detergent.

Do not connect to 

drinking water supply 

without backflow 

preventer

Appliance not suitable for connection to the drinking water mains without 
backflow preventer. 

Summary of Contents for Dual Clean RPW105DM














Reviews: